Affordable fire protection coating chamber test
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The fire-retardant coating tester (combustion chamber method) is primarily used to test the flame-retardant performance of fire-retardant coatings applied to the surface of combustible substrates under laboratory conditions. According to the GB12441-2018 standard, the test methods include the small chamber method, the large panel method, and the tunnel method. The test results are usually evaluated based on the mass loss during combustion and the charring volume to assess the quality of the fire-retardant coating.
Feature
Complies with national standards: The testing instrument complies with the requirements of GB12441-2018 "Classification and Test Methods for Fire Performance of Decorative Fire-Retardant Coatings," ensuring the accuracy and reliability of the test results.
Compatible with multiple test methods: The equipment is compatible with various test methods, including the small chamber method, large panel method, and tunnel method, meeting different testing needs.
Testing under laboratory conditions: Suitable for testing the fire resistance performance of fire-retardant coatings applied to the surface of combustible substrates under laboratory conditions, using combustion mass loss and charring volume to evaluate the quality of the fire-retardant coating.
Structural design: The equipment has a reasonable structural design, complying with international flame retardant testing standards, ensuring the safety and effectiveness of the testing process.
Wide range of applications: Suitable for determining the flame resistance characteristics and flame resistance time of decorative fire-retardant coatings applied to the surface of combustible substrates, as well as experiments on flame propagation characteristics.
Sample making
1. The test plate of the fireproof coating tester (small chamber method) is made of birch five-layer plywood conforming to GB738-75 "broadleaf wood plywood", its size is 300mmx150mmx5mm, and the surface of the sample should be smooth and smooth, without joints and other defects.
2. before the test board is coated with fireproof paint, the state should be adjusted to constant at the temperature of 25±1℃ and the relative humidity of 60%——70% (the weight change of 24h interval is not more than 0.1%)。
3. according to the coating ratio of 200——250g/m2 (thick paste coating allows to increase to 500g/m2) to test the fire retardant coating evenly covered on the surface of the test plate and around, when the need for multiple coating, the interval between two times should be 24h.
The finished specimens shall be adjusted to constant weight according to the condition state specified in 2 articles, and ten specimens of each fireproof coating shall be prepared.
Technical parameters
| Item | Description |
|---|---|
| Instrument Structure | Composed of a main control box and a combustion box. The control box is movable, made of electrostatic steel plate (t=1.2mm) with a spray-painted surface for a smooth and aesthetic appearance. |
| Observation Window | Equipped with a glass window on the front for observing the sample's combustion status at any time. |
| Burner Material | Made of brass. |
| Temperature Control System | Digital temperature control system. |
| Thermocouple Specifications | Outer diameter: 2mm, Accuracy: Class II, Range: 1300℃. |
| Timer Accuracy | Error not exceeding 1s/h. |
| Alarm System | Alarms every 15 seconds during the test to remind the operator to record the current combustion status. Combustion duration: 4 minutes. |
| Gas Source | Liquefied petroleum gas or natural gas. |
| Rotameter | Adjustable flow rate of combustion gas. |
| Pressure Regulator | High-precision pressure regulator to adjust the gas pressure to standard requirements. |
| Power Requirements | AC220(±10%)V/50HZ. |
| Control System | Relay control system with all electronic components from well-known domestic brands to ensure better machine performance and detection accuracy. |
| Safety Features | Overload and short-circuit protection for the power supply. |
| Instrument Dimensions | Approximately 340mm x 230mm x 794mm. |
| Sample Holder Tilt Angle | Can be tilted 45° ± 2°. |
| Copper Combustion Cup Specifications | Outer diameter: 24mm ± 0.1mm, Wall thickness: 1mm ± 0.06mm, Height: 17mm ± 0.1mm, Volume: 6mL. |
| Fuel | Chemically pure grade anhydrous ethanol. |
Application
The fire-retardant coating combustion test apparatus (small chamber method) and the fire-retardant coating small sample test furnace are used to conduct combustion tests under laboratory conditions to determine the flame spread performance of fire-retardant coatings applied to the surface of combustible substrates.
Standards
GB 14907—1994:General specifications of fire resistive coating for steel structure
GB 14907—2002:Fire resistive coating for steel structure
ETAG：2006:European Technical Approval Guideline 2006
BS 8202:1992:2:Coatings for fire protection of building elements - Part 2: Code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance
Send product request
Other supplier products
 |
ASTM F1930 manikin tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The burning manikin system is used to test the overall thermal protection per... |
 |
Kinematic Viscosity Tester-Petroleum Products Test Equipment，ISO 3104 fuel and petroleum products viscosity tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Petroleum Products Kinematic Viscosity Tester is a specialized instrument used to measu... |
 |
Fiber Crimp Elasticity Measuring Device (for Fiber Crimp Elasticity Tester) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: YG362C fiber crimp elasticity meter is used for crimp degree of 1-22... |
 |
Automotive OEM crash simulation male dummy manufacturer | The 50th Percentile Male Crash Test Dummy is a biomechanical surrogate designed for frontal automotive crash testing. It is based on anthropometric... |
 |
Windshield Washer Nozzle Fatigue Test MachineISO 6255，Automotive windshield washer system test equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Windshield Washer Nozzle Fatigue Test Machine is designed to evaluate the durability an... |
Same products
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
