Automotive Wire Scratch Resistance Tester
Get a quote：
Whats/App: +86 181 0160 0864
The Automotive Wire Scratch Resistance Tester is designed to evaluate the abrasion resistance and durability of automotive wire insulation under mechanical wear conditions. You can use this device to simulate long-term friction, vibration, and contact stress, ensuring that wire coatings maintain integrity and prevent conductor exposure during service life.
Application
This tester is suitable for:
(1) Abrasion resistance testing of automotive wires and cables.
(2) Evaluation of insulation durability in wire harness systems.
(3) Quality control of cable coatings and insulation materials.
(4) R&D validation of wiring systems for automotive, aerospace, and electronics applications.
Standards
The tester adheres to global standards for material abrasion testing, including:
ISO 6722-1(Road vehicles – Electrical cables – Test methods for abrasion resistance)
SAE J2394(Standard test for electrical resistance of automotive wire insulation under abrasion)
LV 112(Volkswagen standard for automotive cable durability)
GB/T 5023(China’s national standard for electric cables – Abrasion tests)
UL 758(Appliance Wiring Material standard for insulation integrity)
These standards ensure consistent evaluation of wire insulation durability, coating adhesion, and resistance to mechanical wear.
Working Principle
The tester operates bycontrolled mechanical abrasion:
Sample Mounting: Automotive wires or cables are clamped between two moving jaws.
Abrasion Cycle: A weighted abrasive head (e.g., tungsten carbide) moves back and forth across the wire surface at a preset load (e.g., 20 N) and speed (e.g., 30 cycles/min).
Cycle Execution: The test runs until insulation breach or a predefined cycle count (e.g., 10.000 cycles) is reached.
Performance Assessment: Post-test, samples are evaluated for insulation damage, conductor exposure, or coating wear using microscopy or electrical continuity tests.
Test Principle & Applications
Abrasion Resistance Testing (ISO 6722-1/SAE J2394):
Wires are subjected to 5.000–20.000 cycles to simulate years of vibration and friction.
Pass/fail criteria: No conductor exposure or insulation breach (e.g., <0.1 mm wear depth).
Key Industries
Automotive: Validating engine bay wiring, door harnesses, and battery cables.
Aerospace: Testing in-flight entertainment system cables.
Consumer Electronics: Assessing USB-C and HDMI cable durability.
The Automotive Wire Scratch Resistance Testing Machine is essential for manufacturers developing robust wiring systems, ensuring compliance with safety standards and minimizing field failures. Its precision and adaptability make it a cornerstone of automotive component testing laboratories.
Send product request
Other supplier products
 |
Medical Masks Bacterial Filtration Efficiency (BFE) Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Medical Masks bacterial filtration efficiency tester also called BFE test machine ... |
 |
Fuel Water Separator Test Bench | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Fuel Water Separator Test Bench primarily follows ISO/TS 16332-2006 "Diesel en... |
 |
Ejection Kinetic Energy tester / Kinetic Energy Tester | Product Introduction: Velocity measuring ejection kinetic energy tester, suitable for ejection projectiles, energy storage ejection toys, non-ener... |
 |
Computer controlled horizontal tensile testing machine | Product Introduction: The microcomputer controlled horizontal tensile testing machine (hereinafter referred to as the testing machine) is mainly u... |
 |
Guidewire Pushing Force Tester ASTM F | Standards YYT0807 - 2010 YY/T0663.2 - 2016 ASTMF2394 - 2007 Main Uses The guidewire pushing force tester is a precision testing tool in the med... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
