Plastic Smoke Density Tester F313
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific optical density of smoke generated during the combustion of plastics. Developed according to GB/T 8323.2-2008, ISO 5659.2-2006, and ASTM E662-2014, it provides accurate data on smoke generation characteristics of materials. The device is widely used in plastics, construction, automotive, and aerospace industries to evaluate fire safety performance and ensure compliance with fire protection requirements.
Application
You can use the F313 Plastic Smoke Density Tester in the following areas:
Plastics industry: Evaluate smoke generation of various plastic materials, especially for fire safety assessment and material selection.
Construction industry: Test smoke density of building materials, including coatings and plastics used indoors.
Automotive industry: Assess smoke generation of interior materials to meet fire safety standards.
Aerospace industry: Conduct fire safety evaluations of aircraft materials and components.
Research institutions: Simulate fire scenarios for fire prevention and firefighting research.
Fire safety product development: Support testing and certification of fire-resistant materials.
Public safety applications: Evaluate safety materials used in airports, train stations, shopping malls, and other public spaces.
Standards
The instrument conforms to the following national and international standards:
(1) GB/T 8323.2-2008 – Plastics – Smoke generation – Part 2: Determination of smoke density using the single-chamber method
(2) ISO 5659.2-2006 – Plastics – Smoke generation – Part 2: Determination of optical density
(3) ASTM E662-2014 – Standard test method for specific optical density of smoke generated by solid materials
(4) BS 6853:1999 – Railway applications – Smoke generation from passenger carriage materials
(5) NFPA 262 – Standard test method for flame and smoke spread
(6) UL 94 – Standard for flammability of plastic materials
(7) ISO 1210 – Determination of thermal stability and flammability of plastics
Parameters
| Parameter | Specification |
|---|---|
| Measurement range | 0.0001–100% smoke density; 0–924 (six automatic ranges) |
| Operating voltage | 200–240 V, 50 Hz |
| Environmental conditions | Room temperature – 40°C, relative humidity ≤85% |
| Heat flux | 50 kW/m² |
| Light source | 6.5 V incandescent lamp, wavelength 400–750 nm |
| Detector | Silicon photodiode, 0–100% transmittance, 0.001% precision |
| Fuel type | Propane ≥95% purity |
| Burner | Igniter and nozzle combination, 10 mm from sample |
| Smoke measurement system | Digital display of optical density |
| Chamber design | Fully open doors for easy loading, cleaning, and side-mounted controller |
| Gas sampling port | Optional, for toxicity testing |
| Chamber coating | Chemically resistant and easy to clean |
Send product request
Other supplier products
 |
Fabric Drying Tester | Product Introduction: This device is developed for the automatic test of "dryness" method A and method B specified in JIS L 1096 (Fabric test meth... |
 |
Standard Helmet Visual Field Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Standard Helmet Visual Field Tester is a precision instrument designed to eval... |
 |
Coolant pulsation testing machine | Get a quote： Whats/App: +86 181 0160 0864 The Coolant Pulsation Testing Machine is a precision testing system designed to evaluate automotive coo... |
 |
Automotive HVAC Manikin | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Automotive HVAC Manikin is designed to evaluate thermal comfort and air distri... |
 |
Photovoltaic module backplane peeling strength testing machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Photovoltaic Module Backplane Peeling Strength Testing Machine is a specialize... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Seller: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
