ISO Standard High Precision Continuous Load Surface Performance Measurement Instrument
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Continuous Load Surface Performance Measurement Instrument is designed for evaluating coating adhesion, friction resistance, scratch resistance, and peeling behavior under continuously increasing load conditions. By applying proportional vertical loading during controlled linear motion, the instrument enables precise detection of surface performance changes and critical failure points, making it suitable for detailed analysis of coating durability and interfacial properties.
Standards
GB/T 6040-2008 Test Method for Wear Resistance of Metal Surfaces
GB/T 17657-2022 Test Methods of Evaluating the Properties of Wood-Based Panels and Surface-Finished Panels (including abrasion and scratch tests)
ISO 20502 Fine Ceramics and Coatings — Scratch and Wear Testing
ISO 1518 Paints and Varnishes — Determination of Resistance to Scratching
ASTM D3702 Test Method for Wear Rate of Materials Using a Rotating Drum Apparatus
ASTM D1894 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
JIS P 8139 Determination of Friction and Wear Properties of Coatings
JIS P 8147 Determination of Surface Friction Coefficient and Scratch Properties of Coatings
JIS K 7317:2022 Plastics — Film and Sheeting — Determination of Coefficient of Friction
Parameters
| Parameter | Specification |
|---|---|
| Sliding speed | 60 – 600 mm/min |
| Sliding distance | 1 – 50 mm |
| Motion mode | SINGLE mode: stops automatically after preset distance |
| REPEAT mode: reciprocating motion, up to 9.999 cycles | |
| Load range | 0 – 100 gf / 0 – 1000 gf |
| Vertical load | 0 – 50 g / 0 – 500 g |
| Maximum sample size | 220 × 100 mm, thickness up to 8 mm |
Features
Wide evaluation range achieved through continuous load application, enabling assessment of adhesion strength from thin films to thick coatings
Scratch needle tip radius range from 5 μmR to 200 μmR, suitable for various coating thicknesses
Real-time monitoring of friction resistance changes during reciprocating motion
Accurate detection of surface condition changes and coating delamination cycles
Digital servo automatic zeroing ensures stable baseline measurements
Selectable sensitivity settings at 0. 10. 25. 50. and 100% FS
Integrated dynamic strain amplifier with low-pass filtering at 1. 10. and 100 Hz
Overload protection and high-frequency noise suppression ensure safe and reliable operation
Send product request
Other supplier products
 |
ECE R16 Seatbelt Test Dummy Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The ECE R16 crash test dummy is a professional anthropomorphic test device re... |
 |
Transmission belt flammability and flame diffusion characteristics tester，Accurate Flame Diffusion Measurement for Belts | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: The conveyor belt flammability and flame diffusion tester is suitabl... |
 |
Fabric Downproof Tester(Rolling Box) | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Fabric Downproof Tester (Rolling Box) is designed to evaluate the down-proof performanc... |
 |
Micro Rapid Closed Cup Flash Point Tester(Pensky Martens) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Automatic Flash Point Tester designed for accurate and repeatable determination of the flas... |
 |
Rubber Resilience Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard Complies withISO 4662:1986(international),JIS K6255(Japan), andGB/T 1681(China) s... |
