ISO 15105 gas permeability tester for plastic film and packaging materials
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
YBB 00082003 Determination of Gas Permeability of Pharmaceutical Packaging Materials
GB/T 1038.1-2022 Plastics - Films and Sheets - Test Methods for Gas Permeability - Part 1: Differential Pressure Method
ASTM D1434 Standard Test Method for Determining Gas Permeability of Plastic Films and Sheets
ISO 2556 Plastics - Determination of gas transmission rate of films and sheets at atmospheric pressure - Pneumatic method
ISO 15105-1 Plastics - Films and sheets - Determination of gas transmission rate - Part 1: Differential pressure method
JIS K7126-A Test method for gas transmission rate of plastic films and sheets by differential pressure method
Features
1.Features standard membrane calibration and external sensor calibration functions
2.Real-time monitoring of test status with full-process data logging ensures complete reproducibility of all test data curves, facilitating post-test evaluation of the testing process
3.Features an open database system for streamlined data analysis
4.Simultaneously measures gas transmission rate, solubility coefficient, and diffusion coefficient of test specimens
5.Three fully independent test chambers enable concurrent testing of three identical or different specimens
6.Wide-range, high-precision temperature and humidity control accommodates diverse testing conditions
7.Offers dual test process evaluation modes: proportional and fuzzy logic
8.Test range can be extended as needed to accommodate high permeability testing requirements
9.Enables data fitting at any temperature, facilitating acquisition of test results under extreme conditions
10.Supports testing of toxic, flammable, and explosive gases (requires modification)
11.Computer-controlled system automates the entire testing process
12.Provides standard membranes for rapid calibration, ensuring accuracy and universality of detection data
13.Equipped with RS232 universal data interface for convenient data transfer
Parameters
| Item | Specifications |
|---|---|
| Measurement Range (Film) | 0.01 ~ 50000 cc/m²·24h·0.1MPa |
| Number of Test Samples | 3 |
| Number of Main Sensors | 3 |
| Test Mode | Single-chamber independent |
| Vacuum Resolution | 0.1 Pa |
| Vacuum Degree | < 10 Pa |
| Temperature Control Range | 5°C ~ 65°C |
| Temperature Control Accuracy | ±0.1°C |
| Test Pressure | Upper test gas chamber: -0.1 MPa ~ +0.15 MPa (standard)Lower permeation gas detection chamber: 0 ~ 1333.33 Pa |
| Gas Source Pressure | 0.4 MPa ~ 0.6 MPa |
| Test Gas | O₂, N₂, CO₂ or other gases |
| Gas Inlet Interface | Φ6 mm |
| Vacuum Pipe Diameter | 1/4" |
| Calibration Method | Standard film calibration, external calibration of vacuum sensor |
| Sample Thickness | ≤3 mm |
| Sample Size | Φ97 mm |
| Permeation Area | 38.48 cm² |
| Main Unit Dimensions (L×W×H) | 760 mm × 575 mm × 450 mm |
| Main Unit Weight | 88 kg |
| Power Supply | AC100 ~ 240V 50/60Hz |
Accessories
Standard main unit
Temperature control system
Computer with professional software
Dedicated sample extractor
Vacuum grease
Quick quantitative filter paper
Vacuum pump
Send product request
Other supplier products
 |
Syringe Seal Integrity Under Negative Pressure Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Meet the standard YY0053-2008. GB 15810-2019 single-use sterile syringe, ISO7886-1:2017 si... |
 |
Cap Torque Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com A Bottle Cap Torque Tester is a specialized device used to measure the torque applied to ... |
 |
Contact heating and cooling tester STD-F7 | Whats/App: +86 156 1874 6768 Web: standard-groups.com The sensation of coldness or warmth when skin touches a fabric is referred to as the "coldn... |
 |
Protective Clothing Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Related Standards GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for S... |
 |
Pressure Transmission Flow Meter Test Instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Pressure Transmission and Flow Tester is widely used in multiple fields and is mainly u... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
