Multi-Function Thermal Conductivity Measurement Platform
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
Multi-Function Thermal Conductivity Measurement Platform is an absolute-method measurement system designed for accurate determination of thermal conductivity, thermal diffusivity, specific heat capacity, and thermal effusivity of solids, liquids, pastes, and powders. By integrating multiple transient techniques on a single platform, the system enables direct calculation of thermal properties from raw data without calibration materials, supporting reliable and repeatable measurements across a wide range of material types.
Application
The Multi-Function Thermal Conductivity Measurement Platform is suitable for thermal property evaluation in research, quality control, and material development, including:
Polymers, composites, and building materials
Liquids and phase-change materials
Pastes, powders, and bulk solids
Soil and polymeric materials
Typical test samples include solid blocks and plates, liquid samples, powders, pastes, and soil specimens, depending on the selected sensor and test method.
Standards
The platform supports internationally recognized absolute measurement standards, including:
(1) ISO 22007-2: Plastics — Determination of thermal conductivity and thermal diffusivity — Transient plane heat source method
(2) ISO 22007-7: Plastics — Determination of thermal conductivity and thermal diffusivity using transient plane heat source
(3) GB/T 32064: Transient plane heat source method for thermal conductivity and thermal diffusivity of building materials
(4) ASTM E3088: Determination of thermal conductivity and thermal diffusivity using the transient plane source method
(5) ASTM D7896: Transient hot-wire method for thermal conductivity, thermal diffusivity, and volumetric heat capacity of liquids
(6) ASTM D5334: Transient line-source probe method
(7) ASTM D5930: Determination of thermal conductivity of plastics by transient line-source technique
Parameters
| Method | TPS | THW | MTPS | TLS |
|---|---|---|---|---|
| Applicable Materials | Solids, pastes, powders | Liquids, phase-change materials | Solids, pastes, powders | Soil, pastes, polymers |
| Measurement Module | 3D bulk, anisotropic, plate, thin film; general: specific heat | Bulk | 3D bulk, anisotropic, plate; 1D standard | Bulk |
| Thermal Conductivity (W/m·K) | 0.01–500 | 0.01–2 | 0.03–500 | 0.1–8 |
| Thermal Diffusivity (mm²/s) | 0.01–300 | Up to 0.5 | 0.01–300 | Not applicable |
| Volumetric Heat Capacity (MJ/m³·K) | Up to 5 | Up to 5 | Up to 5 | Not applicable |
| Thermal Effusivity (W·s½/m²·K) | 20–40000 | Not applicable | 20–40000 | Not applicable |
| Sample Size (mm | mL) | Ø10 or square | 20 mL | Ø25 or square |
| Sample Thickness (mm) | ≥0.05 | Not applicable | ≥0.1 | Probe length 100 |
| Maximum Sample Size | Unlimited | Unlimited | Unlimited | Unlimited |
| Test Time (s) | 2–160 | 1 | 2–160 | 180 |
| Accuracy (Thermal Conductivity) | 5% | 2% | 5% | 5% |
| Repeatability (Thermal Conductivity) | 2% | 1% | 2% | 2% |
| Temperature Range (°C) | 0–300 / −75–300 | −50–200 | 0–100 / −50–200 | −40–100 |
| Sample Configuration | Symmetric / asymmetric | Insert type | Asymmetric (single-sided) | Insert type |
| Supported Standards | ISO 22007-2. ISO 22007-7. GB/T 32064. ASTM E3088 | ASTM D7896 | ISO 22007-7 | ASTM D5334. ASTM D5930 |
Send product request
Other supplier products
 |
IMO Flame Spread Test Apparatus | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk IMO Flame Spread Test Apparatus is designed to evaluate the combustion behavior of... |
 |
Single chip liquid crystal touch impact testing machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Liquid crystal touch impact testing machine is mainly used for hard plastics (incl... |
 |
Wire Swing Bending Tester | Get a quote： Whats/App: +86 181 0160 0864 The Wire Swing Bending Tester is designed to simulate bending and swinging conditions that wires may en... |
 |
Bulk Density Measurement Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Bulk Density Measurement Tester is a precision instrument designed to determin... |
 |
Helmet Strap Tensile Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The helmet strap tensile testing machine is designed to simulate tensile, impact, ... |
