Safety Helmet Roll-off Testing Equipment
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The safety helmet retention test equipment is a device used to evaluate the stability of a helmet's fit when subjected to impact. By simulating the pulling forces and impact scenarios of an accident, it accurately assesses the reliability of the helmet's retention system, providing a rigorous technical safeguard for the safety of cyclists. The equipment mainly consists of a simulated head form, a tensile loading system, an impact track, and a data acquisition system. During the test, the helmet is secured to the simulated head form according to standard wearing procedures, and the length of the helmet straps and the tightness of the buckles are adjusted to ensure a fit that matches actual wearing conditions.
Application
Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain height so that the impact force is also applied to the helmet. In this way, the wearing stability performance of the helmet can be evaluated.
Standard
(1)IS 4151:Indian Standard for Protective Helmets
(2)ECE R22.05:Uniform Provisions Concerning the Approval of Protective Helmets and Their Visors for Drivers and Passengers of Motor Cycles and Mopeds
Feature
(1)Dynamic Tensile Testing: A tensile force is applied to the helmet using a tensile loading system, and the maximum tensile force is recorded to ensure the helmet does not detach during the test.
(2)Impact Testing: The helmet is worn and slid down a track to impact a rigid obstacle at a specific speed, and whether the helmet detaches is recorded.
(3)Data Acquisition: An accelerometer records the impact force on the headform, comprehensively evaluating the stability of the fastening system under dynamic impact.
(4)Safety Protection: The equipment is equipped with a safety enclosure to prevent injury from flying helmet fragments during testing.
Parameters
| Item | Detail |
|---|---|
| Mass of initial load | 3 kg ± 0.1 kg |
| Mass of falling weight | 10 kg ± 0.01 kg |
| Lowering height | 0.5 meters ± 0.01 meters |
| Measuring method | manual |
| Electricity | 220V 50HZ |
| Test theory | vertical descent |
Send product request
Other supplier products
 |
Computer controlled electronic universal testing machine | Product Introduction 1. Meet the standard "GB/6344-2018 soft foam polymer tensile strength and elongation at break determination, GB/T6669-2008 fo... |
 |
Scratch Scuff Mar Finish Tester | Get a quote： Whats/App: +86 181 0160 0864 The Scratch Scuff Mar Finish Tester is designed to evaluate the scratch, scuff, and mar resistance of m... |
 |
Female Side Impact Dummy | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The 5th Percentile Female Side Impact Dummy is a next-generation biomechanical sur... |
 |
Safety Footwear Compression Puncture Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk TheSafety Footwear Compression Puncture Testeris designed to evaluate the compress... |
 |
Roof-Mounted Photovoltaic Module Fire Test Apparatus | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Roof-Mounted Photovoltaic Module Fire Test Apparatus is a specialized testing ... |
