New Energy Battery Air Tightness Leak Tester Manufacturer
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
(1) IEC 62619 (Safety requirements for industrial lithium-ion batteries)
(2) IEC 62133 (Safety requirements for portable sealed batteries)
(3) GB/T 31485 (Safety requirements for traction battery systems)
(4) GB/T 4208 (Enclosure protection standard)
(5) ISO 20653 (Degrees of protection for electrical equipment)
Parameters
| Item | Specification |
|---|---|
| Power Supply | AC 220V, 50Hz |
| Power Consumption | ≤20W |
| Air Source Requirement | 0.1–1.0 MPa dry compressed air |
| Inlet Interface | φ6 mm air tube |
| Test Interface | φ6 mm air tube |
| Test Pressure Range | 0–30 kPa |
| Sensor Resolution | 1 Pa |
| Test Accuracy | ±5 Pa |
| Communication Interface | RS232 / USB |
| Data Storage | Internal storage / USB export |
| Operating Temperature | -10°C to 55°C |
| Storage Temperature | -20°C to 70°C |
Features
(1) Built-in intelligent leak detection system with programmable 1+99 test procedures
(2) 7-inch touchscreen interface for simple and intuitive operation
(3) High-speed testing with second-level cycle time for production efficiency
(4) Supports multi-mode testing including pressure decay and differential methods
(5) High sensitivity detection capable of measuring 0.1 Pa-level pressure variation
(6) Real-time data upload supporting MES system integration
(7) Remote monitoring and automatic alarm function for production safety
(8) Safety light curtain protection to prevent operator injury
(9) Stable industrial-grade structure suitable for continuous production use
Accessories
(1) Battery pack sealing fixture system
(2) High-precision pressure sensor module
(3) Air pressure regulation and filtration unit
(4) PLC control system with touchscreen interface
(5) Standard calibration leak reference device
Send product request
Other supplier products
 |
Automatic Pipe Coating Scratch Tester ASTM International | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) AS/NZS AS2924.2 – Scratch resistance of coatings. (2) A... |
 |
PV Light Induced Degradation (LID) Testing Chamber Manufacturer | IEC 61215 Compliant | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards IEC 61215: Terrestrial photovoltaic (PV) modules—Design qual... |
 |
Industrial large walk-in aging test chamber supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com TheLarge Walk-In Aging Chamberis designed for long-duration temperature and h... |
 |
High low temperature test chamber for vehicle testing | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications 1. Automotive R&D Testing Cold Start Test: Verifies engine starting perf... |
 |
Torsional Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal ... |
