Safety Helmet Roll-off Testing Equipment
Get a quote:
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The safety helmet retention test equipment is a device used to evaluate the stability of a helmet's fit when subjected to impact. By simulating the pulling forces and impact scenarios of an accident, it accurately assesses the reliability of the helmet's retention system, providing a rigorous technical safeguard for the safety of cyclists. The equipment mainly consists of a simulated head form, a tensile loading system, an impact track, and a data acquisition system. During the test, the helmet is secured to the simulated head form according to standard wearing procedures, and the length of the helmet straps and the tightness of the buckles are adjusted to ensure a fit that matches actual wearing conditions.
Application
Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain height so that the impact force is also applied to the helmet. In this way, the wearing stability performance of the helmet can be evaluated.
Standard
(1)IS 4151:Indian Standard for Protective Helmets
(2)ECE R22.05:Uniform Provisions Concerning the Approval of Protective Helmets and Their Visors for Drivers and Passengers of Motor Cycles and Mopeds
Feature
(1)Dynamic Tensile Testing: A tensile force is applied to the helmet using a tensile loading system, and the maximum tensile force is recorded to ensure the helmet does not detach during the test.
(2)Impact Testing: The helmet is worn and slid down a track to impact a rigid obstacle at a specific speed, and whether the helmet detaches is recorded.
(3)Data Acquisition: An accelerometer records the impact force on the headform, comprehensively evaluating the stability of the fastening system under dynamic impact.
(4)Safety Protection: The equipment is equipped with a safety enclosure to prevent injury from flying helmet fragments during testing.
Parameters
| Item | Detail |
|---|---|
| Mass of initial load | 3 kg ± 0.1 kg |
| Mass of falling weight | 10 kg ± 0.01 kg |
| Lowering height | 0.5 meters ± 0.01 meters |
| Measuring method | manual |
| Electricity | 220V 50HZ |
| Test theory | vertical descent |
Send product request
Other supplier products
| Down Feather Filling Power Tester | Get a quote: Whats/App: +86 181 0160 0864 Filling power is one of the most important indicators of down feathers and is the main expression of el... | |
| Silicon-based negative expansion in situ fast screening system | Get a quote: Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Silicon-based Negative Electrode Expansion In-situ Fast Screening System is de... | |
| Walk in High and Low Temperature Humidity Test Chamber | Get a quote: Whats/App: +86 181 0160 0864 The High and Low Temperature Humidity Test Chamber is a high-performance environmental simulation syste... | |
| Paint Surface Scratch Resistance Tester | Get a quote: Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Paint Surface Scratch Resistance Tester is a precision instrument designed to ... | |
| Geotextile equivalent aperture tester (wet sieve method) | Get a quote: Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The geotextile equivalent pore size tester (wet sieving method) is an instrument u... |
Same products
| Resistance Loop Bands | Seller: Shanghai Pisces Sporting & Leisure Products Co., Ltd | Resistance Loop Bandsare versatile fitness tools designed to enhance muscle strength, flexibility... | |
| Stainless Steel Flux Cored Welding Wire E308T1-1 E308HT1-1 E308LT1-1 Gas Shielded FCAW Wire for 304 Stainless Steel Welding | Seller: 863048 | Product Description stainless steel flux cored wire E308T1-1 E308HT1-1 E308LT1-1,FCAW stainless ... | |
| E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point | Seller: 863048 | XUNZHUO STAINLESS STEEL CORED WELDING WIRE E317LT1-1 CLASSIFICATION: There are ones with diamet... | |
| Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | Seller: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... | |
| Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | Seller: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |













