Arc Resistance Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
Arc Resistance Tester is a special instrument necessary for simulated safety test items specified in GB1411. IEC61621. ASTMC495. UL746A and other standards.Arc resistance test system is a high-precision equipment specially developed for the test surface of electrical insulation materials, suitable for electrical insulation materials, plastics, films, resins, mica, ceramics, glass, insulating paints and other insulating materials arc resistance performance assessment, can also be applied to product testing and new materials electrical performance research purposes.
Comply with the standard
GB/T1411-2002 dry solid insulating material resistance to high voltage, small current arc discharge test (equivalent to IEC and ASTM D495 and other standards; in line with UL 746A and other test methods
Functional principle
Insulating materials to resist deterioration caused by high-voltage arc action, usually with a standard arc flame on the surface of the material caused by charring to the surface conductivity and the arc disappeared the time required to express the unit of seconds in the plate specimen plus two separated by a certain distance from the tungsten electrodes, depending on the need for high-frequency high-voltage current between the two poles to produce an arc, initially intermittent time is gradually shortened, and finally for the continuous arc and gradually increase the current, the material The material is subjected to gradually harsh arc conditions and eventually cause damage. Arc resistance for high-voltage switch or low-voltage high-current switch insulating materials have important significance, because in the switch opening and closing will often be subjected to arc action, only good arc resistance materials can be selected.
In electrical and electronic equipment within the insulating material when it is exposed to high voltage, small current arc discharge, between them to withstand the initial difference in the immediate surface damage occurs, arc discharge caused by local thermal and chemical decomposition and corrosion and ultimately in the insulating material on the formation of conductive channels, when the formation of conductive channels within the material under test, it can be determined that the material has failed.
Equipment parameters
1. Arc through the time error: 1/8s through 7/8s break ± 5ms, the rest of the program is better than ± 1ms
2. Regulator capacity: 1kVA
3. Rated test voltage: 12.5kV
4.Maximum test voltage: 15.0kV
5. Test voltage accuracy: <1.0%
6. Accuracy of current measurement: <1.0%
7. Electrode pressure on specimen: (0.5±0.05)N
8. Electrode material: tungsten rod
9. Electrode distance: (6.35±0.1)mm
10.Ambient temperature: (23±2)℃.
11.Ambient Humidity: (50±5)%
12. Power supply: 220V±5% 50Hz 10A
Accessories
(1)Optional components that support tester operation.
(2)Examples: electrodes, sample holders, calibration tools, protective shields, and software modules.
(3)Enhance measurement accuracy, safety, and adaptability for different materials.
Test Procedures
(1)Step-by-step instructions for performing arc resistance tests.
(2)Includes sample preparation, instrument setup, electrode positioning, test execution, and data recording.
(3)Ensures consistent, reliable, and repeatable results.
(4)May include calibration checks and safety precautions during testing.
Maintenance Information
(1)Guidelines for routine care to maintain optimal performance.
(2)Covers cleaning, inspection of electrodes and moving parts, calibration, and software updates.
(3)Helps prevent malfunction, ensures measurement accuracy, and prolongs equipment life.
(4)May include troubleshooting for common operational issues.
Send product request
Other supplier products
 |
Multi-Finger Scratch / Mar Tester | Standards Chrysler LP-463DD-18-01 Scratch and Mar Resistance of Automotive Plastics Chrysler PF-10938 Scratch and Mar - Resistance of Molded-In-C... |
 |
Elmendorf Tearing Strength Testers | Get a quote: Whats/App: +86 181 0160 0864 G008 Manual Tearing Tester, The Elmendorf tear method can be used to test the force required to extend ... |
 |
Flooring Radiant Panel Test Apparatus | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Flooring Radiant Panel Test Apparatus is used to tester a variety of flooring ... |
 |
Floor Caster Wear Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Floor Caster Wear Tester is designed to evaluate the wear resistance of chair ... |
 |
Rubber Rebound Elasticity Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Rubber elasticity tester, Rubber strikes the resilience elasticity tester for test... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Seller: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | Seller: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Seller: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Seller: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
