ASTM D7027 Five-Finger Scratch Tester Manufacturer

• 

Get a quote：

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Features

1. Utilizes an LCD screen to control and display the testing process, allowing users to freely configure parameters such as test load, stroke, and movement speed according to requirements. The unique sample fixture design ensures secure clamping and convenient operation.

2. The equipment employs high-quality stepper motor control with guide rail transmission for both lateral and longitudinal movements. This design minimizes clearance, delivers smooth motion with low noise, achieves high testing accuracy, ensures excellent data repeatability, and extends the equipment's service life.

Parameters

Test Procedures

I. Preparation:

1. Inspect accessories: Ensure all components are present, including the scratching finger, weights, shaft rod, etc.

2. Secure Test Specimen: Place the test specimen flat on the testing platform and secure it with clamping blocks.

II. Installation and Parameter Setup:

1. Install Scratch Fingers: Attach scratch fingers (e.g., tungsten carbide tips) to the bottom of five independent shaft rods and hang weights.

2. Set Parameters: Configure test load (e.g., weight of weights), stroke distance, movement speed, and cycle via the LCD screen.

III. Test Execution:

1. Initiate Test: Activate the instrument. The guide rail begins transmission, and the scratching fingers scrape the sample surface back and forth according to preset parameters.

2. Observe the process: Ensure stable equipment operation during testing and avoid external interference.

IV. Conclusion and Analysis:

1. Stop the test: After the timer ends, the guide rail automatically stops. Raise the cross-axis support.

2. Remove the sample: Loosen the clamping block, remove the specimen, and inspect indicators such as scratch depth and width.

3. Evaluate data: Compare the scratch resistance of different specimens and analyze material properties.

Other supplier products

	ASTM D4491 compliant geomembrane tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com As the most cost-effective hydrostatic pressure tester, the Geomembrane Hydrostatic and Per...
	Packaging Film Shrinkage Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D2732: Standard Test Method for Unrestrained Linear Thermal Shrinkage of Pl...
	Catheter Burst Pressure Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Burst Pressure Tester uses the positive pressure method and is designed accord...
	Thrust Washer Friction Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com The thrust washer friction testing machine is mainly used to simulate the frictional contac...
	Guidewires Tip Flexibility Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The guidewire tip flexibility tester is a specialized device used to evaluate...

Same products

	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...