CE Certified Steam Jet Test Equipment Factory Direct Price
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
All medium-contact parts are rust-resistant and suitable for deionized water.
Ceramic plunger pump with direct-drive motor ensures high safety and minimal wear.
Steam injection duration adjustable from 1 second to 9 minutes.
External pressure control valve allows precise adjustment depending on nozzle specifications.
Equipped with door inspection glass, dirt filters, and exhaust port for safe operation.
Automatic sterilization/water replacement system with temperature control.
Electromagnetic door locking ensures safety during pump operation.
Heating vessel with digital temperature display and controlled preheating.
Parameters
| Parameter | Details |
|---|---|
| Flow Rate | 14.8 L/min |
| Working Pressure (P) | 30 – 140 bar (adjustable via external pressure valve) |
| Motor (N) | 6.5 kW, 400 V |
| Plug | 32 A, 5-pole |
| Water Supply | 2 – 3 bar, 15°C |
| Nozzle Distance | 0 – 450 mm |
| Test Angles | 90°, 45°, 30° ±2° |
| Other Components | Door with inspection glass, exhaust Ø 102 mm, connectors, discharge port with dirt filter |
| Base Frame | Stainless steel with enclosure and four guide rails |
| Sterilization/Water Replacement | Automatic weekly cycle: water heated to 68°C, sprayed through nozzles; stops at 70°C; manual water replacement possible. Cooling to working temperature required after sterilization, can be accelerated with cold water addition |
| Door Locking | Electromagnetic locking during pump operation; door cannot be opened while pump is running |
| Heating Vessel | 9.0 kW, max temperature 80°C ±2°C, digital display, preheat time 1 hour |
Accessories
Horizontal sliding unit
Exhaust fan
Laser pointer
Flow meter
Volume-measuring testing equipment (in liters)
Clamping device
Test Procedures
Install the component to be tested inside the chamber and connect the water supply.
Set the nozzle distance and test angle according to the manufacturer’s specifications.
Adjust working pressure via the external control valve.
Configure the steam injection duration on the display (1 second – 9 minutes).
Start the pump using the control unit; the door will automatically lock for safety.
Monitor real-time parameters including pressure, flow, and temperature.
After completion, allow the system to cool to working temperature; perform sterilization/water replacement if required.
Remove tested components and review recorded data for evaluation.
Maintenance Information
Inspect the pump and ceramic plunger for wear and proper operation.
Check pressure valves and flow control system for functionality.
Clean the chamber, inspection glass, and discharge filters regularly.
Perform weekly sterilization/water replacement cycles and monitor water quality.
Verify heating vessel operation and temperature calibration periodically.
Check electromagnetic door locking system for safety compliance.
Send product request
Other supplier products
 |
Sliding Bearing Fatigue Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The sliding bearing fatigue testing machine is an important testing device, mainly used to ... |
 |
SO2 H2S HCL Corrosion Test Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheSO₂ H₂S HCl Corrosion Test Equipmentis designed to simulate corrosive environments using... |
 |
Bundesmann Rain Tester | ISO 9865 Waterproof Fabric Testing Machine Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Rainfall portion consists of 300 identical drips for uniform pr... |
 |
Laboratory filter media test rig ISO 11057 compliant | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Filter Media Test Rig According to ISO 11057 is designed for reliable and... |
 |
High-precision foam indentation hardness testing machine | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Measurement of tensile strength, tear strength, elongation at br... |
Same products
 |
Laser Cutting Machines | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
