ISO Standard Vehicle Sealing Strip Wear Testing Machine | Factory Direct Supply for Automotive Industry
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Feature
1. The friction head support is a straight up-and-down mounting bracket. The weights are directly mounted on the friction head support, and the required mass should be the total mass of the weights plus the friction head and the bracket. (Same as similar products from Germany)
2. The test sample is fixed on a flat plate with grooves, and the plate is secured at both ends with elbow clamps to hold and press the sample during testing.
Parameters
|
Test piece |
150-220mm. |
|
Friction medium |
Width: 20mm, thickness: 4mm, semi-fillet: 20 |
|
Weights |
750g |
|
Friction hammer load |
250g |
|
Speed |
0-100CPm/min. |
|
Counter |
0-999999. |
|
Size of the friction head |
20 20mm. |
|
Reciprocating stroke |
0-160mm. |
|
Power source |
AC220V,10A. |
|
Volume |
647427cm |
Accessoriess
Standard accessories:compatible with PV3313/PV3366 standards, made of wear-resistant rubber,flat pressing block + side clamps, suitable for seal strip samples,1 set each of 250g, 500g, for general load requirements,Abrasion head fixing screws,Operation manual & qualification certificate,Equipment leveling feet (4 pcs)Power cord (compatible with 220V power supply).
Optional accessories:Special fixtures for profiled seal strips (for curved strips like door/trunk seals),Custom abrasion heads (e.g., rubber heads of different hardness, metal heads, for special test standards),Extended weights (1000g, 3000g, for high-load testing),Data acquisition software (records friction cycles, abrasion loss, etc.),Spare abrasion heads (wear part, ensures continuous testing),Sample positioning ruler (improves sample installation accuracy).
Maintenance Information
1. Daily Maintenance
Wipe the fixture/sample table with a dry cloth after each test to remove dust/debris.
Check the tightness of abrasion head screws; re-tighten if loose.
2. Regular Maintenance (Every 3 Months)
Lubricate the vertical motion guide rail with light machine oil.
Calibrate the weight load accuracy with a precision scale.
3. Abrasion Head Replacement
Replace the abrasion head when its surface wear exceeds 1mm (to ensure test consistency).
4. Troubleshooting
If the friction speed is unstable: Check the drive motor’s connection and clean the transmission parts.
Send product request
Other supplier products
 |
Automotive Wires Ozone Aging Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Wires Ozone Aging Chamber is designed to evaluate the ozone resistance of au... |
 |
Nasal Oxygen Cannula Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com This device is used to test various performance characteristics of nasal cannulas, such as ... |
 |
Mask Respiratory Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Mask Respiratory Resistance Tester is designed to measure the inhalation and exhalation... |
 |
Full-Body Garment Stress Tester Manufacturer | ISO 13935 Clothing Mechanical Testing Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features 1.Accurate measurement of garment pressure at multiple body locatio... |
 |
ROSS zigzag tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: The ROSS zigzag resistance tester installed the sole strip test piec... |
