Tibial Tray Fatigue Testing Machine
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Tibial Tray Fatigue Testing Machine is a specialized device designed to evaluate the long-term mechanical durability of tibial implant components used in knee prostheses. It simulates repetitive loading conditions that occur during human walking or physical activity, applying cyclic forces to the tibial tray to assess fatigue resistance, structural integrity, and potential deformation over time. This testing ensures that implants can withstand real-life stress without failure, supporting quality control, product development, and compliance with orthopedic implant standards such as ISO 14879.
Standard
(1)YY/T 0810 (China): Specifies fatigue testing protocols for tibial trays in total knee arthroplasty, focusing on support and protection of plastic bearing surfaces.
(2)ASTM F1800 (International): Defines methodologies for evaluating the fatigue strength of tibial components under cantilever loading conditions.
(3)ISO 14879-1: Additional compliance for general fatigue testing of total knee joint prostheses.
Product Advantages
(1)Cantilever Loading Precision: Advanced actuator design ensures uniform stress distribution per ASTM F1800 requirements.
(2)5 Million Cycle Endurance: Proven capability to complete YY/T 0810’s 5×10⁶-cycle fatigue test without calibration drift.
(3)Dynamic Load Control: Closed-loop system maintains R=0.1 stress ratio during sinusoidal/random loading (0.1–10 Hz).
(4)Real-Time Fracture Detection: AI-powered acoustic emission monitoring identifies micro-cracks at sub-millisecond intervals.
(5)Intuitive Workflow: 21.5” capacitive touchscreen with gesture control and pre-loaded SOPs for 10+ implant geometries.
(6)Modular Environmental Chambers: Quick-swap pods for simulated physiological (-20°C to +50°C) and corrosive environment testing.
Product Features
(1)Electromagnetic Actuator: 3.000 N peak force capacity with programmable load ratios (R=0.1–10).
(2)Cantilever Loading System: Simulates physiological knee joint moments with ±20 mm axial displacement.
(3)Dynamic Load Control: 0.1–10 Hz frequency range with programmable waveforms (sine, square, random, custom).
(4)Thermal-Mechanical Chamber: ±0.3°C temperature stability with integrated humidity control (10–95% RH).
(5)High-Speed Imaging Ready: Syncs with external cameras for full-field strain mapping (DIC optional upgrade).
(6)Safety First: Triple-redundant emergency stop, overload clutches, and laser-based specimen breakage detection.
Accessories
(1)Tibial Tray Test Fixture Kit:
Self-centering collet system (28–40 mm tibial tray compatibility)
Laser-aligned loading anvils with diamond-like carbon (DLC) coating
(2)Thermal-Mechanical Chamber:
15L capacity with rapid cooling/heating (15°C/min)
316L stainless steel interior with HEPA filtration
(3)TestMaster Ultimate Software:
Automated S-N curve generation and fatigue limit calculation
21 CFR Part 11-compliant audit trail with blockchain timestamping
Remote monitoring via dedicated iOS/Android app
(4)Operator Kit:
Calibrated torque wrench set (0.5–50 Nm)
Specimen alignment gauges (ASTM F1800 compliant)
(5)Calibration Bundle:
NIST-traceable force calibration weights
Temperature/humidity verification probe
(6)Safety Kit:
Laser safety curtains
Acoustic enclosure with 30 dB noise reduction
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Dynamic Force | ±3.000 N (6.000 N peak optional) |
| Frequency Range | 0.1–10 Hz (0.01 Hz increments) |
| Load Ratio (R) | 0.1–10 (adjustable) |
| Axial Displacement | ±20 mm (0.1 μm resolution) |
| Torque Capacity | ±20 Nm (0.01 Nm resolution) |
| Temperature Range | -20°C to +50°C (environmental chamber) |
| Humidity Control | 10–95% RH (non-condensing) |
| Data Sampling Rate | 100 kHz (synchronized across 16 channels) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 2.000W |
| Dimensions (W×D×H) | 1.500 × 1.000 × 2.000 mm |
| Weight | 750 kg (including environmental chamber) |
| Noise Level | <65 dB (A-weighted) |
Send product request
Other supplier products
 |
Pipe drop hammer impact testing machine / Pipe Dropping Hammer Impact Tester | Product Introduction: 1. Name: drop hammer impact testing machine 2. Model :STD G-1 3. Product introduction: Automatic series drop hammer impa... |
 |
Geosynthetic creep tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The geosynthetic material creep testing system is used to determine the tensile cr... |
 |
Snap Button Tester | Get a quote: Whats/App: +86 181 0160 0864 The Snap Button Tester is a device specifically designed to test the durability of buttons on electroni... |
 |
Manual Wire Bending Tester | Get a quote： Whats/App: +86 181 0160 0864 The Manual Wire Bending Tester is designed to evaluate the mechanical durability of electrical wires ac... |
 |
Qinsun 440 | Standard The Qinsun 440 is engineered to meet stringent international testing standards, including ASTM G155, ISO 105 B02, SAE J2412, and IEC 68... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
