Intramedullary Nails Four - point Bending Fatigue Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Intramedullary Nails Four-Point Bending Fatigue Tester is a specialized testing device designed to evaluate the fatigue performance and mechanical durability of intramedullary nails under cyclic bending loads. It applies repeated four-point bending forces to simulate long-term in vivo stresses, allowing assessment of nail strength, flexibility, and resistance to fracture over time. This tester is widely used in orthopedic research, product development, and quality control to ensure intramedullary nails meet required mechanical reliability standards.
Standard
(1)YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intramedullary nails and locking screws, including load application, cycle counting, and failure criteria.
(2)ASTM F1264: International standard covering fatigue testing of intramedullary fixation devices, with protocols for sinusoidal loading at 5Hz–20Hz frequencies.
Product Advantages
(1)Precision Fatigue Testing:
Electromagnetic servo-controlled loading system ensures sinusoidal force application with ±0.5% accuracy, adhering to ASTM F1264’s frequency and load requirements.
Adjustable R-ratio (0.1–0.9) and load range (100 N–10.000 N) for versatile testing scenarios.
(2)Customized Fixturing:
Modular four-point bending clamps with interchangeable roller diameters (8–16mm) and contour-matching designs to accommodate diverse nail diameters and lengths.
Anti-slip mechanisms and specimen alignment guides for consistent results.
(3)Advanced Data Acquisition:
Real-time monitoring of cycles, load, and displacement with 5000Hz sampling rate.
Automatic calculation of key parameters: fatigue life (N cycles to failure), fatigue strength (S-N curve generation), and crack initiation points.
(4)User-Centric Design:
Intuitive software with preloaded SOPs for YY/T 0591 and ASTM F1264 compliance.
Multi-language interface (English/Chinese/Spanish) and exportable reports (PDF/Excel/CSV).
(5)Durability & Safety:
Corrosion-resistant steel frame and overload protection system for long-term reliability.
Low-noise operation (<65 dB) suitable for laboratory environments.
Product Features
(1)Load Capacity: 100 N–10.000 N (axial) / 50–500 Nm (torsional).
(2)Frequency Range: 0.01–20 Hz (adjustable for static/dynamic tests).
(3)Temperature Control: Optional environmental chamber (-20°C to +150°C) for simulating physiological conditions.
(4)Software Suite:
Customizable test profiles with automated pass/fail criteria.
21 CFR Part 11 compliance for audit trails and electronic signatures.
(5)Calibration: NIST-traceable certification included, with annual recalibration available.
Technical Parameters
| Parameter | Specification |
|---|---|
| Force Resolution | 0.1 N (axial) / 0.01 Nm (torsional) |
| Angular Accuracy | ±0.1° |
| Crosshead Speed | 0.001–500 mm/min |
| Power Supply | 220V/110V, 50/60Hz |
| Dimensions (W×D×H) | 800×600×1.800 mm |
| Weight | 400 kg |
| Compliance | CE, ISO 13485. YY/T 0591. ASTM F1264 |
Send product request
Other supplier products
 |
Catheter Flexibility Tester | Compliance Standards YY/T 1554 - 2017. etc. ISO 10555 -Intravascular catheters- Sterile and single-use catheters ISO 11o70- Catheter introducers... |
 |
Automatic Coating Adhesion Scratch Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Automatic Coating Adhesion Scratch Tester is a high-precision instrument desig... |
 |
Automotive Seat Belt Buckle Bending Tester | Get a quote： Whats/App: +86 181 0160 0864 The Automotive Seat Belt Buckle Bending Tester is designed to evaluate the bending performance and dura... |
 |
Laboratory Car Wash Simulator | Get a quote： Whats/App: +86 181 0160 0864 The Laboratory Car Wash Simulator is a specialized testing system designed to replicate automatic car w... |
 |
Large Walk-in Aging Chamber | Get a quote： Whats/App: +86 181 0160 0864 TheLarge Walk-In Aging Chamberis designed for long-duration temperature and humidity environmental test... |
