Single Cable Vertical Flame Tester Manufacturer | IEC 60332-1-2 Cable Flammability Test Equipment Supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Parameter
| Description | Details |
|---|---|
| Combustion Angle | 0°-45° |
| Power | 50W, 500W, 1000W |
| Flame Application Time | 0——999.9S |
| Flame Height | 20±1mm, 40±2mm, 50——60mm |
| Temperature Measurement Distance | 10±1mm, 55±1mm, 95mm (assuming the last value should have a unit, here added "mm" for consistency) |
Test Procedures
Prepare the cable to be tested and plug in the power cord, then turn on the power switch.
1.Secure the product to the fixed crossbar, adjust the height of the marking ruler, place the filter paper under the burning product, and turn on the gas (or propane gas) and compressed air. Set the burning time to the required number of seconds according to the cable diameter and standard settings. Tap the touchscreen to ignite, adjust the gas flow meter and air flow meter, and use the gauge to adjust the flame height: blue flame 50-60mm, outer flame 170-190mm.
2. Determine the number of burns required. Set the counter to 1 for one burn cycle. The cycle will automatically stop after completion. For two burns, set the counter to 2. Press the black dot next to the counter to reset. The burning cycle will continue until the set number of times is reached and then automatically stop. Adjust the position of the Bunsen burner to ensure it is burning the product. Press the touchscreen to start the test or press the foot switch (automatic ignition). The burning time starts counting. When the burning time is complete, the Bunsen burner automatically extinguishes and the afterglow time begins. The test is complete after the afterglow time.
3. After the test, check the condition of the product.
4. Finally, press the exhaust button to vent the test exhaust gas outside.
Send product request
Other supplier products
 |
Image test standard transmission light box | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard CIE 15:2004: Adheres to colorimetry standards for spectral measurement. ISO 3664... |
 |
Walk in Constant Temperature and Humidity Test Chamber Testing Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Walk-in Constant Temperature and Humidity Test Chamber is a high-precisio... |
 |
Xenon Light Fastness Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Benefits 1.Full-Spectrum Xenon Lamp Xenon arc lamps emit a continuous spec... |
 |
Bone cement fatigue machine manufacturer | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Cement Four-Point Bending Fatigue Tester is a specialized mechanical testing devic... |
 |
Fabric Negative-ion Concentration Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Fabric Negative-ion Concentration Testers typically detect the amount of nega... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
