1-2L Floor Stand micro stritted Reactors
An optional HP (High Pressure) flat gasket version has been added for maximum allowable working pressure of 2900 psi (200 bar) at 350 °C. Both fixed head and moveable vessel designs are available. An optional pneumatic lift is available for the heavier 2 liter cylinder and heater. It should be noted, however, that the 2 liter, fixed head model is tall and may not be convenient to operate on a standard height bench top. We recommend using a floor stand
Other supplier products
|
|
WDFS lab series magnetic stirred reactor |
On the basis of WDF reaction kettle,pedestal,rack and crane are equipped,lifting handwheel on rotational equipment drives thread rod to life kettle... |
|
|
WHFS Lab series magnetic stirring reactor |
On the basis of WHF reaction kettle,pedestal,rack and crane are equipped,lifting handwheel on rotational equipment drives thread rod to life kettle... |
|
|
Magnetic stirring stainless steel reactor |
Its stirring system adopts static seal,stirrer is connectde to motor driver with magnetic stirrer with touchless transfer torque,thus to replace dy... |
|
|
100-2000LOpen ellipse sealing type reactor |
Wide applicable range,pressure is relatively low,ones whose common pressure is lower than 5.0MPa(725psi),capacitance is lower than 3000L will choos... |
|
|
No leakage high pressure or vacuum reactor |
They will be a good choice for chemists working with very expensive materials or materials only available in small amounts. They will also appeal t... |
All supplier products
Same products