Automatic Kinematic Viscosity Tester for Petroleum Products
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
You can use this instrument in the following scenarios:
(1) Testing petroleum and petroleum-based products.
(2) Measuring physical properties of chemical liquids.
(3) Oilfield product testing and R&D.
(4) Monitoring fuel and lubricants in railways and transportation systems.
(5) Laboratory and university research on liquid viscosity.
(6) Standardized measurements in metrology and calibration departments.
Standards
You can operate this tester in compliance with the following standards:
(1) GB/T 265-2017 – Petroleum Products: Determination of Kinematic Viscosity.
(2) ASTM D445-2020 – Kinematic Viscosity of Transparent and Opaque Liquids (for dynamic viscosity calculation).
(3) ISO 3104:2021 – Petroleum Products: Determination of Kinematic Viscosity.
(4) IP 71:2020 – Petroleum Products: Determination of Kinematic Viscosity.
Parameters
| Parameter | Unit | Value |
|---|---|---|
| Applicable Fluid | – | Newtonian liquids |
| Heating Method | – | Water bath with constant temperature electric heating |
| Test Capillaries | pcs | 5 (simultaneous testing) |
| Heating Medium | – | Clean water |
| Temperature Range | ℃ | Room temperature – 100 |
| Heating Power | W | 1700 |
| Temperature Control | – | Automatic, ±0.1℃ |
| Bath Dimensions | mm | Φ300 × 300 |
| Overall Dimensions | mm | 540 × 370 × 640 |
Accessories
(1) Capillary Viscometers: Calibrated for measuring flow time.
(2) Clamps: Specialized fixtures for secure holding of viscometers.
(3) Thermostatic Bath: With stirring function to maintain uniform temperature.
(4) Heating Control Instrument: Automatic temperature control.
(5) Stirring Motor: Ensures even temperature distribution in the bath.
(6) Power Cable: Standard 220 V, 50 Hz.
(7) Clean Water: Used as the heating medium.
(8) Temperature Sensor: Real-time monitoring of bath temperature.
Send product request
Other supplier products
 |
Building Material Smoke Density Tester | Mainly used for building materials and their products when the static smoke generated by the determination of smoke, is the test of textile materia... |
 |
Air Intake Filter Test System，ISO 5011 Air Intake Filter Performance Test System | The Air Intake Filter Test System is designed for testing industrial air filters and engine air filters according to ISO 5011. It evaluates filters... |
 |
Infusion device Leakage negative pressure tester | The Infusion Device Leakage Negative Pressure Tester is designed to evaluate the airtightness of syringes, infusion sets, and related medical devic... |
 |
STD Battery short-circuit tester | The Battery Short-Circuit Tester is designed for external short-circuit safety testing of lithium-ion batteries and battery packs. The system simu... |
 |
In-situ expansion analysis system | The In-situ Expansion Analysis System is designed for high-precision measurement of dimensional and volumetric changes in electrochemical cells and... |
Same products
 |
ASTM F2100 mask tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application G506 Automatic Filter Perfor... |
 |
Membrane Filter Integrity Testing Equipment | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Hydrophobic filter integ... |
 |
Fuel Water Separation Efficiency Test Rig | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Fuel Water Separator Te... |
 |
DIN 51524 Purification Equipment for Hydraulic Oil | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this tester in... |
 |
ASTM D6304 oil moisture tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this unit in t... |
