BKNET-0102 Welded Pipe Eddy Current Flaw Detector
Eddy current testing of welds is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe.
Eddy current weld testingis a non-destructive testing technique for detecting component defects by using the principle that the eddy current induced by the AC electromagnetic coil on the surface of the metal member encounters a defect. The oscillating current is generated in the conductive member by the excitation coil by the principle of electromagnetic induction, and the amount of change in the eddy current is measured by the detecting coil, thereby obtaining information on the component defect.
Eddy current testing is a non-destructive testing technique in which an alternating current electromagnetic coil induces eddy currents on the surface of a metal member. It is suitable for the detection of defects in conductive materials, including ferromagnetic and non-ferromagnetic metal materials.
BKNET-01 2 NDT weld testing equipment is used for on-line and off-line inspection of welded pipes. It has high sensitively to axial defects such as unwelded welding, dark spots and open cracks. In the production process, products are caused by welder failure. Slow and long-term injuries can be reliably detected.
BKNET-0102 Welded Pipe Eddy Current Flaw Detector performance
|
Detection channel |
Double channel |
|
Detection speed |
1～500m/min(online) |
|
Frequency range |
100Hz-1MHz |
|
Gain |
0～99dB，step0.1dB |
|
Phase rotation |
0-360°step1° |
|
High pass |
|
|
Low pass |
1Hz～10000Hz |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector Features:
High precision end and end-to-tail signal removal
High precision real-time, delayed alarm output
Fast digital／analog electronic balance
Memory track delay blanking function
Non-equal amplitude phase／amplitude alarm domain
Remote automatic help system
Synchronous alarm output for internal and external clock control
Nanjing BOKENA Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It isone of the most professional ndt testing equipment suppliersin China. We sincerely invite and welcome people from all around the world to invest and create more values together.
Send product request
Other supplier products
 |
Magnetic Flux Leakage Testing Equipment | Electromagnetic detection is a very important non-destructive testing method and is widely used. Mag flux testingis a magnetic method of nondestruc... |
 |
BKNET-101 Automatic Eddy Current Testing | The eddy current testing (BKNET-101) is a fully automated eddy current inspection systemthat uses large-scale imported integrated circuits combined... |
 |
GSET-551 Steel Wire Eddy Current Flaw Detector | GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction Using the eddy current signal processing method and high-performance DSP algori... |
 |
GSET-551 Steel Wire Eddy Current Flaw Detector | GSET-551 Steel Wire Eddy Current Flaw Detector Brief Using the eddy current signal processing method and high-performance DSP algorithm, the NDT ... |
 |
Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02 | During the processing of bearing rings, various defects are often generated on the surface or inside, and cracks occupy a large proportion of all d... |
Same products
 |
Tubular Stranding machine use bearing Z-527250.ZL | Seller: JinHang Precision Bearing Co.,LTD | The cylindrical roller bearings Z-527250.ZL have high rigidity, high radial load carrying capacit... |
 |
Cable strander bearing Z-527275.ZL with brass cage | Seller: JinHang Precision Bearing Co.,LTD | Bearing structure:single row cylindrical roller bearing Bearing factory model:Z-527275.ZL China ... |
 |
Precision bearing 527463 for Tubular stranding machine | Seller: JinHang Precision Bearing Co.,LTD | The strander roller bearing Z-527463.ZL 670x820x69mm have a lubrication groove and three lubricat... |
 |
Cooper rope strander equipment bearing Z-527249.ZL | Seller: JinHang Precision Bearing Co.,LTD | High precision bearings Z-527249.ZL must guide machine parts with high precision and support forc... |
 |
Cooper rope strander equipment bearing Z-547406.ZL | Seller: JinHang Precision Bearing Co.,LTD | Non-standard roller bearing 547406 used in high speed wire cable steel rope strander tubular mach... |
