MFL101 Tank Floor MFL Scanner
Technical Characteristics of MFL101 mfl floor scanner
Unique full modular structure, from the main body of the computer mechanism the handle of MFL101 Tank Floor MFL Scanner can be quickly folded, disassembled. It is easy to transport and access manholes. With humanized operation design, the height of armrest and adjustable angle, suitable for different operators. Precise signal conditioning circuit. The four-layer PCB with mixed power excellent performance. data word signal processing system, supercomputing power, advanced evaluation algorithm.
High-performance touch industrial tablet. The operation is very convenient does not require a keyboard and mouse. Unique probe design. It can pick up the magnetic flux leakage signal to overcome the unwanted signal caused by the eddy current effect. The number of physical channels is up to 32. High-performance lithium battery pack, which is at least 50% lighter than the equivalent capacity lead-acid battery Software design that can be operated efficiently.
All scan parameter settings graphical, intuitive, and easy to use, dramatically increasing the speed of operation and avoiding errors. The magnetization is quickly adjustable. By adjusting the ground clearance the magnetic pole, the magnetization of the detection target plate can be quickly changed to meet the requirements of detecting the thickness and minimize the gravity of the instrument and the bottom plate. This design allows the instrument to adapt to a wide range of floor thicknesses and reduce operator effort, increasing battery life.
Different degrees of corrosion are represented by non-color blocks. Online analysis of corrosion degree and position, position coordinates can be displayed in a table or on a scan.
MFL101 Tank Floor mfl Tank Floor InspectionPerformance Parameters Host:
Industrial tablet computer interface:
Chinese Working principle: Magnetic flux leakage method:
NdFeB permanent magnet Channel number: 32
Scan width: 260mm
Drive mode: DC brushless motor, worm gear reducer, The motor can be raised.
Convert manual and electric drives at any time.
Detection speed: 0 m / s~0.7m /s step-less adjustable
Detection thickness: 8-20mm Penetration coating: non-magnetic
Penetration thickness: <4mm
Sensitivity: can be set (8-12mm thick 20 % material loss of the bottom plate, 40% material loss of the 12-20mm thick bottom plate
Data storage: local hard disk storage, USB disk dumping
Real-time analysis: Yes
Offline software
Battery specification: 14V40AH
Nanjing BOKENA Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It isone of the most professional ndt testing equipment suppliersin China. We sincerely invite and welcome people from all around the world to invest and create more values together.
Send product request
Other supplier products
 |
LGET-553 Aluminum Tube Eddy Current Flaw Detector | LGET-553 Aluminum Tube Eddy Current Flaw Detector Brief Introduction The aluminum tube is a type of non-ferrous metal which may have one or more... |
 |
Eddy Current Testing Equipment | Bokena is one of the most professional eddy current test equipment suppliersin China. We have been devoted to produce ect testing equipmentand ect ... |
 |
Magnetic Flux Leakage Testing Equipment | Electromagnetic detection is a very important non-destructive testing method and is widely used. Mag flux testingis a magnetic method of nondestruc... |
 |
Eddy Current Testing Equipment for Tube, Bar and Wire | ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals ... |
 |
GSET-551 Steel Wire Eddy Current Flaw Detector | GSET-551 Steel Wire Eddy Current Flaw Detector Brief Using the eddy current signal processing method and high-performance DSP algorithm, the NDT ... |
Same products
 |
Cannula For Hypodermic Needle | Seller: 866413 | Zhejiang INI Medical Devices Co., Ltd. offers Cannula For Hypodermic Needle, designed for use in ... |
 |
Multi-stage Tandem precision roller bearing T-3092-6A in stock | Seller: JinHang Precision Bearing Co.,LTD | Bearing factory Number: T-3092-6A Item code：T-3092-6A Structure:Basic Type Tandem Thrust Cylind... |
 |
Food screw extruder multi-stage tandem thrust bearings T-2872-6A | Seller: JinHang Precision Bearing Co.,LTD | Bearing factory Number: T-2872-6A Item code：T-2872-6A Original place:China LuoYang Lubrication:Oi... |
 |
Film screw extrusion machine gearbox tandem roller bearing T-25105 8A | Seller: JinHang Precision Bearing Co.,LTD | Bearing factory Number: T-25105 8A Item code：T-25105.8A Original place:China LuoYang Lubrication:... |
 |
PVC screw extrusion equipment gearbox roller bearings T-25105 8A | Seller: JinHang Precision Bearing Co.,LTD | Application：gearboxes for single and twin screw extrudes in the rubber and plastics industry. de... |
