Overmolding & 2k Molding
Molding Over Molding& 2k Molding
The same type of material of different colors is usually used for two-color injection molding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product, the performance difference of the two materials actually used may be very big, if the elastomer is injected into the surface of a rigid material, the most difficult thing to solve during 2k moulding process is the delamination and shedding of the bonding surface of the two materials.
OVERMOULDED2K MOLDS FOR SALE
Water Proof Plastic Enclosure Mold
The product will be made by two times, which will inject the second piece after finishing the first piece in the other mold and different injection machine, normally will be no specific request for 2 different pieces injection time, injection machine.
Drip Tip Mold
The two-color molding will be made in one same injection machine at the same time by 2 times injection, with 2 injection barrels and 2 different injection gates by 2 different molds, but the product will be picked up one time, it will request 2 molds in one specific 2k injection machine to finish final injection.
2K Molds
This mold will be put with a movable core on gate position of the core side, the movable core is pushed to the rising position when injecting the first-color material, and the first color part is solidified, After that, the movable core return back through the action of the hydraulic device, at this time, another barrel injects the second color material into the space left by the retreat of the core, the mold is opened and the part is taken out after finishing one injection after it's solid.
Material Selection For 2K Plastic Injection Moulding
In addition to meeting the requirements of product function and appearance in the material selection of two-color products, whether the adhesion between raw materials can be solved well will be related to the success of two-color products in 2k moulding process is also the difficulty of 2k moulding technology.
The following four points should also be considered in the selection of materials for two-color injection molded products:
2K MoldingDesign Guide
Structural design is the most important part of 2k molding product design, the structure design of the product should not only consider the function of the product but also consider whether it meets the processing conditions and the complexity of the processing mold, in the design of two-color injection products, in addition to the issues to be considered for ordinary injection products, the following aspects should also be considered:
As a 2k molding manufacturer, 2k molding factory, we will do our best to meet all the needs of customers.
Send product request
Other supplier products
 |
4 Cavity Mold | 4 Cavity Injection Mold The multi-cavity mold can save production time, for example, one mold can produce 1 piece of part in one minute, but it ca... |
 |
Gas & Water Assisted Injection Mold | Gas & Water Assisted Injection Mold Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection ... |
 |
8 Cavity Mold | 8 Cavity Mold USM as a medical plastic injection mold supplier provides products including medical device plastic parts, suction tips, blood col... |
 |
Engine Coolant Pipe | Engine Coolant Pipe Gas-assisted injection moldequipment mainly includes nitrogen generators, superchargers, gas-assisted controllers, nitrogen ... |
 |
Automotive Water Intake Manifold Mould | AutomotiveWater Inlet Manifold Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not requ... |
Same products
 |
steel moulds for precast concrete | Seller: Sino Mould (Hubei) Co.,Ltd | steel moulds for precast concrete What Are Steel Moulds & Their Role for precast concre... |
 |
new jersey barrier moulds | Seller: Sino Mould (Hubei) Co.,Ltd | new jersey barrier moulds Barrier Types & Custom Configurations Single-sided parapet bl... |
 |
culvert moulds | Seller: Sino Mould (Hubei) Co.,Ltd | culvert moulds Structural & Configuration Types By Mold Configuration: Horizontal-type ... |
 |
manhole forming systems | Seller: Sino Mould (Hubei) Co.,Ltd | manhole forming systems Precast Manhole/ Inlet Molds , Also called Molds for Inspection Cha... |
 |
precast concrete molds | Seller: Sino Mould (Hubei) Co.,Ltd | precast concrete molds About Sino Mould Sino Mould is a precast concrete mould manufacturer... |
