Tobee® 8/6E-AHR Rubber lining pump Frame Plate Liner F6036R55
Tobee® 8/6E-AHR Rubber lined slurry pumps wet end parts,Cover Plate Liner F6018R55, Impeller F6147R55,Frame Plate Liner F6036R55, Throat Bush F6083R55. EAM005 Bearing assembly is an important wear parts for 6inch pumps as well.
Tobee®Rubber Slurry Pump Spare Partsare mainly pump wetted parts and directly contact with slurries, They are very crucial to the service life of slurry pumps. The wetted parts include impeller, liners, throat bush, frame plate liner insert, casing etc. The rubber slurry pump parts are more suitable for delivering strong corrosive or abrasive slurries of small particle size without sharp edges.
Tobee®Rubber Slurry Pump Main parts:
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
• Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Throat bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
HEBEI TOBEE PUMP CO.,LIMITED
Email:
| |
Send product request
Other supplier products
 |
Tobee® SPR Rubber Lined Vertical Slurry Pump | Tobee®SPR Rubber Lined Vertical Slurry Pumpsare available in various standard lengths to suit common sump depths, for very deep sumps or where ... |
 |
Tobee® 16x14TU-GH High Head Gravel Pump | Tobee® 16x14TU-GH High Head Gravel pumpis designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle s... |
 |
Tobee® Mission Magnum I Pump | Tobee® Mission Magnum I Pumpsare proven as reliable, heavy-duty, low-cost slurry pumps. The 3×2×13 through 8×6×14 pumps... |
 |
Tobee® White Ceramic Shaft Sleeve C075J04 | Tobee® 4x3C-AH Slurry PumpWhite Ceramic Shaft Sleeve C075J04Wear Parts, It is precision formed of high density alumina, fired, and ground to si... |
 |
Tobee® 8x6E-G Gravel Pump | Tobee® 8x6E-G Gravel Pumpis suitable for handling large particles at consistently high efficiency, resulting in lower costs. Casing is designed... |
Same products
 |
WN(Q) Dredging Pump | Seller: Shijiazhuang Chongmu Fluid Machine Co., Ltd | The dredging pumpis a kind of mud pump developed by our company, which is used for dredging and h... |
 |
IH Stainless Steel Centrifugal Pump | Seller: Shijiazhuang Chongmu Fluid Machine Co., Ltd | The IH type single-stage single-suction cantilever chemical centrifugal pump is an energy-saving ... |
 |
Horizontal Multistage Pump | Seller: Shijiazhuang Chongmu Fluid Machine Co., Ltd | Looking for a reliable horizontal multistage pump manufacturerwith high-quality, durable, and exp... |
 |
Diaphragm Pump DP03BL Series | Seller: PJM MECHANICAL CO.LTD | Diaphragm Pump DP03BL Series We specifically manufacture DP03BL diaphragm pump for use in medica... |
 |
Gr300 Pneumatic Conveying Equipment/Air Vacuum Powder Automatic Conveying Equipment | Seller: Greentech International (Zhangqiu) Co., Ltd | Cast Iron Blow Through Airlock Valve Positive Rotary FeederRotary airlocks displace bulk solids f... |
