API610 OH2 Horizontal Overhung Centerline mounted Low-Flow Petrochemical Process Pump

• 

Standards: ISO 13709/API 610 (OH2)
Operating Parameters:Capacity Q: 0.8 to 12.5 m³/h ( 2.2-55 gpm ) / Head H: up to 125 m ( 410 ft ) / Pressure P: up to 5.0 MPa ( 725 psi ) / Temperature T: -80 to 450 ℃ ( -112 to 842 ℉ )
Features:Standard modularization design / Low-flow design / The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position / Shaft sealed by cartridge mechanical seal +API flushing plans.ISO 21049/API682 seal chamber accommodates multiple seal types / Full interchangeability with ZA/ZE bearing assembly and mechanical seals / Efficient airfins cooled bearing housings / High radial load roller bearing. Back-to-back angular contact bearings handle axial loads / The pump rotation is clockwise when looking from the drive end / Jack screws (motor side) for an easier alignment setting / Bearing lubrication and cooling options:Oil mist /Fan cooling

Other supplier products

	API610 OH2 Horizontal Overhung Centerline mounted Centrifugal Oil Pump	Standards:ISO 13709/API 610 (OH2/BB2) Operating Parameters:Capacity Q: up to 500 m³/h ( 2200 gpm ) / Head H: up to 300 m ( 985 ft ) / Pressure...
	ISO2858 ISO5199 Standard Horizontal Overhung Chemical Process Pump	Standards : ISO 2858 / ISO 5199 Operating Parameters: Capacity Q: up to 2000 m³/h ( 8800 gpm ) / Head H: up to 160 m ( 525 ft ) / Pressure P: ...
	API685 Vertical Sump Sealless Magnetic Drive Pump	Standards:API 685 / ISO 15783 Operating Parameters:Capacity Q: up to 160m³/h ( 700 gpm ) / Head H: up to 135m ( 440 ft ) / Pressure P: up to 2...
	API610 BB4 Horizontal Foot mounted Radially Split Multistage Diffuser Pump	Standards: ISO 13709/API 610(BB4) Operating Parameters :Capacity Q: up to 600 m³/h ( 2640 gpm ) / Head H: up to 1200 m ( 3940 ft ) / Pressure ...
	API685 Horizontal Overhung Self-Priming Sealless Magnetic Drive Pump	Standards:API 685 / ISO 15783 Operating Parameters :Capacity Q: up to 160 m³/h ( 700 gpm ) / Head H: up to 95 m ( 310 ft ) / Pressure P: up to...

Same products

	Gr400 Pneumatic Conveying Equipment/Pneumatic High Pressure Conveying Equipment	Seller: Greentech International (Zhangqiu) Co., Ltd	Cast Iron Blow Through Airlock Valve Positive Rotary FeederRotary airlocks displace bulk solids f...
	Slurry Pump Impeller	Seller: Shijiazhuang Industrial Pump Factory Co., Ltd.	Ais a rotating component of athat accelerates fluid outward from the center of rotation, thus tra...
	Vertical foam pump Warman foam pump	Seller: Sunbo Machinery	The SF foam pump is robustly constructed, designed for continuous pumping of highly abrasive and ...
	Horizontal Froth Pump Warman	Seller: Sunbo Machinery	The SAHF Horizontal Froth Slurry Pumpis pumping slurry with obstinate froth, which is equivalent ...
	SPR Vertical Slurry Pump Parts Casing Impeller FPL	Seller: Sunbo Machinery	The SV(R) series Vertival slurry pumpparts is equivalent to warman SP slurry pump parts, which is...