API610 BB1 Horizontal Foot mounted Single Case Single Stage Axially Split Chemical Pump
Standards: ISO 13709/API 610(BB1)
Operating Parameters :Capacity Q: up to 10000 m³/h ( 44030 gpm ) / Head H: up to 180 m ( 590 ft ) / Pressure P: up to 6.3 MPa ( 915 psi ) / Temperature T: -20 - to 160 ℃ ( -4-320 ℉ )
Features: The removal of the upper pump part is easy to maintain(no need to remove inlet and outlet pipings) / The pump shaft runs in oil lubricated rolling bearings with the rotor located by the non drive end bearing which also accommodates any residual axial thrusts from the hydraulically balanced impeller. / The shaft can be reversed to allow the pump to be driven from either side. / Seal chamber accommodates packing and multiple mechanical seal types. / Pump casing flanges according to GB/T9113.1-2010 PN25 - Other flange standards upon request / Coupling with spacer simplifies the access to the bearing frame and the seal chamber (driving end). / Jack screws (motor side) for an easier alignment setting
Send product request
Other supplier products
 |
ISO2858 ISO5199 Standard Horizontal Overhung Chemical Process Pump | Standards : ISO 2858 / ISO 5199 Operating Parameters: Capacity Q: up to 2000 m³/h ( 8800 gpm ) / Head H: up to 160 m ( 525 ft ) / Pressure P: ... |
 |
API610 VS4 Long shaft Vertical Sump Pump | Standards :ISO 13709/API 610(VS4) Operating Parameters: Capacity Q: up to 900/400 m³/h ( 3960/1760 gpm ) / Head H: up to 135/100 m ( 443/328 f... |
 |
API 610 OH2 Horizontal Overhung Centerline mounted Petrochemical Process Pump | Standards:ISO 13709/API 610 (OH2) Operating Parameters:Capacity Q: up to 2600 m³/h ( 11450 gpm ) / Head H: up to 330 m ( 1080 ft ) / Pressure ... |
 |
Horizontal Overhung Foot mounted Blockless Low Shear Vortex Pump | Standards:ISO 13709 /API610 Operating Parameters:Capacity Q: up to 300 m³/h ( 1320 gpm ) / Head H: up to 160 m ( 525 ft ) / Pressure P: up to ... |
 |
API610 BB4 Horizontal Foot mounted Radially Split Multistage Diffuser Pump | Standards: ISO 13709/API 610(BB4) Operating Parameters :Capacity Q: up to 600 m³/h ( 2640 gpm ) / Head H: up to 1200 m ( 3940 ft ) / Pressure ... |
Same products
 |
Yoyik offer Thrust disk ALD320-20X2 for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Yoyik offer Thrust disk ALD320-20X2 for power stationMain: hydraulic machinery and components, h... |
 |
China offer Aperture gland ALD320-20X2 for Electric Company | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China offer Aperture gland ALD320-20X2 for Electric CompanyDongfang Yoyik perennial supply spare... |
 |
Yoyik offer Throttling ring DLD320-20X2 for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Yoyik offer Throttling ring DLD320-20X2 for power generationDongfang Yoyik has been focused on m... |
 |
China Supplier Aperture gland DLD320-20X2 for steam turbine | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China Supplier Aperture gland DLD320-20X2 for steam turbineDeyang YOYIK have power plant profess... |
 |
Fluidic Connections | Seller: Nanjing Runze Fluid Control Equipment Co.,Ltd | Fluidic Connections Fluidic Connections were manufactured from molds and injection machines by a... |
