Submersible Pump

Submersible Pump

SP、SPR pumps are vertical centrifugal submersible slurry pumpsthat is in liquid to handle abrasive large particle and high concentration slurries. centrifugal slurry pump for salecan operate normally without shaft gland and shaft gland water even lack of intake. SP pump body is made from antifriction metalthe impeller is made from antifriction metal or rubber and polyurethane. Submerged parts of the SPR pump coated rubber for transportation corrosive slurry.

Long Teng submersible mud pumpApplications

The SPR and SP designs, manufactured in popular metric sizes, provide a simple, yet rugged range of sump pumps specially developed for:

Abrasive and/or corrosive slurries

Large particle size

High slurry densities

Continuous or “snore” operations

Heavy duties demanding cantilevered shafts

Design Features

Bearing Assembly -

The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.

The assembly of rubber lined pumps manufactureris grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.

Column Assembly -

Completely fabricated from mild steel. The SPR model is

elastomer covered.

Casing -

Has a simple bolt-on attachment to the base of the column. It is manufactured

from a wear resistant alloy for the SP and from moulded elastomer for the SPR.

Impeller -

Double suction impellers (top and bottom entry) induce low axial bearing

loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.

Upper Strainer -

Drop-in metal mesh; snap-on elastomer or polyurethane for SP and SPR pumps. Strainers fit in column openings.

Lower Strainer -

Bolted metal or polyurethane for SP; moulded snap-on elastomer

for SPR.

Discharge Pipe -

Metal for SP; elastomer covered for SPR. All wetted metal parts are completely rust protected.

Submerged Bearings -

None

Agitation -

An external agitator spray connection arrangement can be fitted to the

rubber lined centrifugal pumpsas an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.

Materials -

Pumps can be manufactured in abrasive and corrosive resistant materials.

Learn more information about our pump,you can visit our website

Other supplier products

	Metal Slurry Pump	Metal Slurry Pump M, SH, HH series pumps contain cantilever and horizontal centrifugal pumps,which apply to transport slurry with strong corrosion ...
	Long Teng Slurry Pump	Long Teng Slurry Pump The currentHorizontal Slurry PumpChinais commonly utilized in mining, electrical power, metallurgy, environmental protection,...
	WQ Series Submersible Sewage Pumps	WQ Series Submersible Sewage Pumps WQS series of deephigh-lift submersible sewage pumpis used in Yangtze River Three Gorges Development processfull...
	ZJL Pump	ZJL Pump ZJL pump is a single-stage single-suction vertical type centrifugal slurry pump wholesale. The ZJL series pumps use international advanced...
	Pump Parts	Pump Parts 100% Interchangeable with AH(R) HH G Long Teng Slurry Pumps. Both metal or rubber slurry pump partsare available High chrome white iron ...

All supplier products

Same products

	Zbk03 Series Roots Vacuum Pump/Roots Pump	Seller: Greentech International (Zhangqiu) Co., Ltd	ZBK series roots vacuum pump is a kind of coarse vacuum acquisition of equipment, it is widely us...
	"Brand Assurance Globe valve GR2-0-KB-G5/30X48 for power generation	Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Brand Assurance Globe valve GR2-0-KB-G5/30X48 for power generation YOYIK is a large number of st...
	Wear Resistance Electric stop valve NKJ961Y-16C for thermal power plant	Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Wear Resistance Electric stop valve NKJ961Y-16C for thermal power plant YOYIK professional produ...
	Brand Assurance Stop valve J61Y-600CL for power generation	Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Brand Assurance Stop valve J61Y-600CL for power generation YOYIK is a large number of steam turb...
	JWSP-1 Oil Sampling Pumps	Seller: Shenzhen Joinwe Smart Co.,Ltd	JWSP-1 Oil Sampling Pumpis made of imported PA material, 303 stainless steel and 6061 aluminum al...