BW Mud Pump
The BW pumpbelongs to piston pump, and have the function of common mud pump.
BW Mud Pump Common Model
Commonly used models are BW-150 mud pump, BW-160 mud pump, BW200 mud pump, BW-250 mud pump, BW320 mud pump, etc. It can be used in the field of geological exploration, oil drilling, mining, coal construction, geology, engineering construction supporting, chemical industries etc.
The pump head is mainly composed of a cylinder liner, a cylinder top sleeve, a cylinder head, a piston, a tie rod, a steel ball, a valve seat, a valve cover and the like. It is a bottom-in and top-out type. The rod drives the piston to reciprocate to control the steel ball and The valve seat is opened and closed for suction and discharge operations. The three cylinders have a common suction and drainage chamber. An inlet pipe joint is installed on the waist flange on the side of the suction chamber to connect the suction hose (3-inch pressure-resistant hose) and the water filter, and the other end is blocked with the inlet pipe end cap.
The drain chamber is equipped with an air chamber with a waist flange on one side and a 32 valve on the other side (easy for cleaning and unloading). The inlet pipe joint and air chamber can be changed 180 degrees on the left or right side of the pump according to the site layout. The piston is installed on the piston seat and is easy to disassemble. When the piston is worn, you can adjust the piston by pressing the M30 × l. 5 flat nut to compress the piston to make it expand and continue to work. One end of the tie rod is connected to the other end of the cross head. It is connected to the piston seat and is provided with an oil cup to facilitate its lubrication and a sealing component of the pump head.
BW Mud Pump Product Features
Compact structure, beautiful appearance and durability;
Detachable, easy to repair and relocate.
Uniform flow, low pressure fluctuations
High efficiency and energy saving.
Safety operation
We are one of the best oil well drilling equipment suppliers,we produce single and double acting reciprocating pump,RFQ today!
Send product request
Other supplier products
 |
F-1300 Mud Pump | Features F 1300 mud pumpfor oil drilling have features of solid and compact structure, small volume, good and reliable performance. It can meet ... |
 |
F-800 Mud Pump | Features F 800 mud pumpfor oil drilling have features of solid and compact structure, small volume, good and reliable performance. It can meet the ... |
 |
Mud Gate Valve | Technology Specification: The design meets the requirement of API SPEC 6A Nominal bore:2”-4″ Rated working pressure: 5000-15000P... |
 |
F-1000 Mud Pump | Features F1000 mud pumpfor oil drilling have features of solid and compact structure, small volume, good and reliable performance. It can meet... |
 |
Fig 2202 Hammer Union | Fig 2202 Hammer Union Working Pressure: 15,000 psi(1034 bar) Features: Meets National Association of Corrosion Engineers Standard MR-01-75 ... |
Same products
 |
pump | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Насос |
 |
Yoyik offer Thrust disk ALD320-20X2 for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Yoyik offer Thrust disk ALD320-20X2 for power stationMain: hydraulic machinery and components, h... |
 |
China offer Aperture gland ALD320-20X2 for Electric Company | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China offer Aperture gland ALD320-20X2 for Electric CompanyDongfang Yoyik perennial supply spare... |
 |
Yoyik offer Throttling ring DLD320-20X2 for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Yoyik offer Throttling ring DLD320-20X2 for power generationDongfang Yoyik has been focused on m... |
 |
China Supplier Aperture gland DLD320-20X2 for steam turbine | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China Supplier Aperture gland DLD320-20X2 for steam turbineDeyang YOYIK have power plant profess... |
