INTRODUCTION TO HVOF Coating
INTRODUCTION TO HVOF Coating
custom valve gates
Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pressure, wear resistance, corrosion prevention against H2S and CO2, especially wellhead and Christmas tree valves have higher requirements.
Brief Introduction of HVOF TUNGSTEN CARBIDE COATING
High-velocity oxygen-fuel is a new thermal spray technology invented by Browing in the United States in 1981. Nowadays, it is generally called HVOF (High-velocity oxygen-fuel). The flame generated by this technology is a high-temperature, high-speed combustion flame flow generated by using a hydrocarbon-based gas or hydrogen such as propane or propylene, and high-pressure oxygen in a combustion chamber or in a special nozzle. The velocity of the combustion flame can reach more than five Mach (1500 m/s). The axial direction of the powder is fed into the flame, and the sprayed particles can be heated to a molten or semi-molten state. Accelerate the velocity of the combustion flame to a speed of up to 300-500 m/s or even higher, resulting in a high-density, dense, high-quality coating.
The HVOF has a high speed, but the temperature is relatively low, about 300 ° C. For the spraying of WC-Co cemented carbide, the decomposition of WC during spraying can be effectively suppressed. The coating not only has high bonding strength, but also has excellent compactness and abrasive resistance. The abrasive resistance of the coating greatly exceeds that of the plasma sprayed layer, which is equivalent to the explosive sprayed layer and exceeds the hard chrome layer and the sprayed layer. The range of applications is extremely wide.
Send product request
Other supplier products
 |
HIGH PERFORMANCE VALVE GATE DISPLAY | HIGH PERFORMANCE VALVE GATEDISPLAY Wear Resistance Valve Gate Valve Gate: The core parts of flat gate valves used in the petrochemical industry req... |
 |
COMMON Valve Seat Coating MATERIALS | COMMON Valve Seat CoatingMATERIALS Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed positi... |
 |
Introduction to Hvof Tungsten Carbide Coating | Introduction to Hvof Tungsten Carbide Coating HVOF COATING Cemented Carbide Valve Seat Valve Seat: The detachable surface parts in valve are used t... |
 |
Custom Valve Gate Product Data | Custom Valve GateProduct Data GATES OF GATE VALVE Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pr... |
 |
GATES OF GATE VALVE | GATES OF GATE VALVE Valve Gate Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pressure, wear resist... |
Same products
 |
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан |
 |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
