New Type Wafer Concentric Butterfly Valve
Basic information
New Type Wafer Concentric Butterfly Valve ofwafer butterfly valve manufacturers can be used as adjusting and intercepting equipment in a variety of corrosive operating conditions.
Features
1. Body jaw adapts to 10bar and 16bar bolt fixation;
2. Special flange for butterfly valve is not required during installation;
3. Disc for spraying nylon, corrosion resistant;
4. No pin structure, no corrosion point.
2. Special flange for butterfly valve is not required during installation;
3. Disc for spraying nylon, corrosion resistant;
4. No pin structure, no corrosion point.
Principle
Because large diameter may have too much torque, the large diameter is recommended to use the turbine for easier manual operation.
Installation and Commissioning
Clean the sealing cover of butterfly valve and dirt in the pipeline, the flange mouth on the pipeline must be right, pressure the rubber sealing ring of concentric butterfly valve, there is no need to use the sealing washer, it is forbidden to install the concentric butterfly valve and weld the flange, otherwise it will burn the rubber sealing ring of butterfly valve. For specific use, please consult ZhengFeng Valve Group.
Part |
Material |
Standard |
Body |
Ductile Iron |
EN 1563/DIN 1693 |
Disc |
Ductile Iron+Nylon |
EN 1563/ISO 4633 |
Stem |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
Handle |
Ductile Iron |
EN 1563/DIN 1693 |
Seat |
EPDM |
ISO 4633 |
Bushing |
CuZn39Pb1 / C37000 |
EN12167/ASTM B135 |
For the materials options not listed, consult factory. ZhengFeng manufactures valves in more than 50 different alloys. |
Send product request
Other supplier products
Hydraulic Non-Slam Check Valve | Basic Informationof the no slam check valveThis non slam valveprevents backflow of media and reduces water hammer to achieve the safe and quiet eff... | |
Flange Globe Valve | Description of Flange Globe Valve: ZECO forged globe valvescan be divided according to the location of the stem thread. Flange globe stop valveste... | |
Forged Ball Valve | Description of Forged Ball Valve: ZECO forged ball valve is divided into forged two-piece ball valves and forged three-piece ball valves, as well a... | |
Cast Steel Gate Valve | Description of Cast Steel Gate Valve: ZECO cast steel gate valve Chinais in controlled under the quality assurance system of production and manufa... | |
Wafer Concentric Butterfly Valve with Post Indicator 1025 | Basic information of Wafer Concentric Butterfly Valve with Post IndicatorThis valve can be used to open or close the medium in the fluid pipe and i... |
Same products
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан | |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |