Cryogenic Gate Valve
Description of Cryogenic Gate Valve:
The main material of ZECO cryogenic gate valve is selected. Considering from the metallographic aspect, in addition to austenitic steel, copper and aluminum with face centered cubic lattice, general steel will appear low temperature brittleness at low temperature, thus reducing the strength and service life of the valve. When the temperature is higher than -100℃, choose ferritic steel; when the temperature is lower than -100℃, choose austenitic steel; low pressure and small diameter valves can choose copper and aluminum and other materials.Stem and fastener is selected, when the temperature is higher than -100℃, stem and bolt materials adopt Ni, Cr-Mo alloy steel, through appropriate heat treatment, to improve tensile strength and prevent thread bite.Austenitic stainless steel is used when the temperature is higher than -100℃.Low hardness of 18-8 acid resistant steel will cause mutual abrasion between stem and packing, causing leakage of packing.Therefore, the stem surface must be hard chrome plated (thickness 0.04-0.06mm), or nitride and nickel-phosphorous plated to improve surface hardness.In order to prevent nuts and bolts from biting to death, the nuts are generally made of Mo steel or Ni steel and coated with molybdenum disulfide on the surface of the threads.
Features of Cryogenic Gate Valve:
- cryogenic ball valve suppliers,the product of ZECO cryogenic gate valve uses flexible wedge or open wedge. These structures maintain a reliable seal regardless of temperature;
Material of Cryogenic Gate Valve:
No |
Part |
Material |
1 |
Body |
ASTM A350 LF3 |
2 |
Seat Ring |
ASTM A276 410 + STL |
3 |
Wedge |
ASTM A350 LF3 + STL |
4 |
Stem |
ASTM A182 F6 |
5 |
Bonnet Gasket |
Graphite + SS316 |
6 |
Bonnet Bolt |
ASTM A193 B16 |
7 |
Bonnet Nut |
ASTM A194 4 |
8 |
Bonnet |
ASTM A350 LF3 |
9 |
Backseat |
ASTM A182 410 |
10 |
Stem Packing |
Reinforced Graphite |
11 |
Handwheel |
KTH330-08 |
As one of the gate valve manufacturers China, we hope that we can benefit you through our products.And our Valve companywill never let you down.
Send product request
Other supplier products
12 Inch Butterfly Valve | Description of 12 Inch ButterflyValve:Most of ZECO 12 inch butterfly valves operated by hand-wheel, wrench and handles, pay attention to the operat... | |
High Pressure Shut-off Valve | Basic information of High Pressure Shut-off Valve This valve is closed after the fire pump is started to cut off the domestic water and ensure the ... | |
Forged Steel Valve | ZECO forged valve refers to the blank of valve, which is a forging piece with certain mechanical properties, shape and size produced by applying pr... | |
Metal Seated Ball Valve | As one of the china ball valve manufacturers, ZECO always adhere to exceed customer expectations,to provide customers with more international stand... | |
Wafer Check Valve | What is a Wafer Check Valve? Wafer check valves are in-line piping valves used to control fluid flow direction and reduce or fully prevent possibl... |
Same products
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан | |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |