Electric Butterfly Valve
Description of Electric Butterfly Valve:
ZECO electric butterfly valve is named after electric actuator operated. Butterfly valve in the pipeline for a long time to use, may be due to special medium, temperature or pressure causes a small number of problems, encounter these problems, we must think of ways to solve, and in order to prevent, no problems of the product for regular maintenance. The leakage of stem sealing usually caused by packing abrasion,can make up for tightening the packing gland. Too large packing force may increase stem friction, and make stem to be hard operated and accelerated the abrasion of packing.
Good sealing inside valve will be affected the sealing performance because of the damage or normal abrasion. For the harsh working conditions, the estimation and repairment beyond the scope of this manual, due to a variety of different structural forms, if need to know in advance, should cooperate with the manufacturer to find a suitable method. The external construction of valve is easy to check and maintain. So rational approach should be taken to prevent mechanical to damage the valve, prevent valve corrosion by the sediments in the atmosphere、chemical substances or wet gas and deterioration of its quality. Thread、bearings or gears work like the working interface should be periodic lubrication.
Features of Electric Butterfly Valve:
Material of Electric Butterfly Valve:
No |
Part |
Material |
1 |
Body |
ASTM A216 WCB + 13Cr |
2 |
Seal Ring |
Graphite + SS304 |
3 |
Retainer Flange |
ASTM A105 |
4 |
Pin |
ASTM A276 410 |
5 |
Disc |
ASTM A216 WCB |
6 |
Stem |
ASTM A276 410 |
7 |
Stem Packing |
Graphite |
8 |
Stem Beating |
SS304 + PTFE |
9 |
Bolt |
ASTM A193 B7 |
10 |
Nut |
ASTM A194 2H |
11 |
Yoke |
ASTM A216 WCB |
Now the electric butterfly valve priceis low, if you want to buy our products,leave us a message.
ZECO Valve Group, as one of the China check valve manufacturers, founded in 1991 located in Shanghai, Yancheng, Wenzhou with focus on manufacturing through conduit gate Valve China, floating ball valve, trunnion mounted ball valve, top entry ball valve,swing check valve, dual plate check valve and forged valve.
Send product request
Other supplier products
Resilient Seated Gate Valve | Features of resilient seated valve Full diameter flat - bottom runner, no debris pooling; Fully covered EPDM disc, no corrosion; Movable d... | |
Stainless Steel Gate Valve | Categories: Gate Valve, Gate Valve By Material Tag: OS&Y Valve Description ZECO Valve supplies china stainless steel gate valves in the ve... | |
Gear Operated Gate valve | Description of Gear Operated Gate Valve: ZECO gear operated gate valve is defined according to the driving mode. Gear operated gate valve is mainl... | |
Top Entry Ball Valve | Description Due to the distinctive nature of the environmental conditions and operating conditions of the process, a typical ball valve is not suf... | |
Triple Offset Butterfly Valve | Here is the china double eccentric butterfly valve.To withstand high temperature, the metal seal must be used, but large leakage; For zero leakage,... |
Same products
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан | |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |