Double Orifice Air Release Valve
ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including control valves, balancing valves, gate valve, butterfly valves, check valves, and air valves. Valve sizing 1/2” to 88”, rating BS 10bar through BS 25bar, served covering buildings & construction, waterworks, fire protection and many other fields. ZECO has excellent product quality and sound managing system.
Basic information of Double Orifice Air Release Valve
This double air valveis a pipeline will be matched equipment, apply to the temperature does not exceed 100 ℃ water, hot water pipe on the pipe from the air.
Features of Double Orifice Air Valve
- ；2. Lower water pressure can be closed to prevent drainage；3. When there is negative pressure, the piston quickly opens to breathe；4. Stainless steel floating ball, long life.
Principle of Double Orifice Air Valve
This os & y type gate valveexhaust, buoy, by gravity pull down one end of the lever, the lever in the tilt state at this moment, in the leverage and vent contact appeared gap, air through the vent through the gap, with the air discharge, water level rise, buoy under the effect of the buoyancy of water float upwards, the lever on the seal face pressure on the porosity, gradually until the vent is completely blocked. The exhaust valve is now completely closed.
Installation and Commissioning of Double Orifice Air Release Valve
When installing the single orifice air release valve, always install a protective valve on the front end to avoid stopping water from being tested. For specific use, please consult ZECO Valve Group.
Product scope, Standards & Materials of Double Orifice Air Release Valve
Size Range: 2"~12"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy Coating Inspection and Test: ISO 5208 / EN 12226-2
Send product request
Other supplier products
 |
Concentric Butterfly Valve | The concentricbutterfly valveis characterized by the stem center, disc center and body center in the same position. Such structures are simple to m... |
 |
Backflow Preventers | Festures of Backflow Preventers The double check valve is designed as a whole, with small structure； Body is streamlined with little resistance l... |
 |
Motorized Ball Valve | As one of the china ball valve manufacturers, ZECO always adhere to exceed customer expectations,to provide customers with more international stand... |
 |
3 Inch Gate Valve | Description of 3 Inch Gate Valve: ZECO 3 inch stainless steel gate valveand 2 flanged gate valveis mainly used for fully open or fully closed swit... |
 |
Swing Check Valve | What is a Swing Check Valve? A Swing Check Valve is desinged to prevent the medium in the pipeline from flowing back. As pressure reaches zero, th... |
Same products
 |
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан |
 |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
