Single Orifice Air Release Valve
Single orifice valve is mounted on the top point or the place where the air is closed in the pipeline, to remove the air in the pipe, making sure the pipe work normally. If not equipped with air valve, the flow of liquid in the pipe will produce dynamic heat caused by gas. Form short circuit, so that the pipe outlet is easy to meet the requirements. Secondly, when the pipeline is running, there will be a power failure, stop the pump pipe will appear negative pressure, and will cause the pipeline vibration or rupture, (exhaust) suction valve will quickly breathe the air into the pipe meat, to prevent pipeline vibration or rupture.
1. Standard
Design & manufacturing |
EN1074-4 |
Flange ends |
EN1092-2, BS4504 |
Inspection & testing |
EN12266 |
2. Technical Specification
Size |
DN50-200 |
Working Pressure |
PN10/16 |
Applicable medium |
water, sewage, etc. |
Applicable temperature |
0℃~80℃ |
3.Main parts material
Part Name |
Material |
Body |
Ductile Iron |
Bonnet |
Ductile Iron |
Cap |
Ductile Iron |
Sealing Ball |
SS304 |
Fasteners |
Carbon steel/Stainless steel |
Gasket |
NBR/EPDM |
4. Features
- Discharge air more flexible
- Preventing of the water hammer
- Discharge the air slowly
- Safer self-protection
- Small volume, light weight, small exhaust flow
- Long service life
Send product request
Other supplier products
Flange Adaptor | Flange adaptor is designed to transfer thepressure thrust of connected pipes andcompensate pipe error, reduce the damage of axial thrust against pi... | |
Single Orifice Air Release Valve | Single orifice valve is mounted on the top point or the place where the air is closed in the pipeline, to remove the air in the pipe, making sure t... | |
Socket End Resilient Seated Gate Valve for PVC Pipe | Non-rising stem resilient seated gate valve is one type of gate valve with flexible wedge as its on-off disc, which moving direction is perpendicul... | |
Non-rising Stem Resilient Seated Gate Valve | Non-rising stem resilient seated gate valve is made of good ductile iron material. The wedge has the function of exchange. Good sealing effect can ... | |
Wafer Type Butterfly Valve | Wafer type butterfly valve is one butterfly valve with simple structure, small size and light weight. It is mainly composed of body, disc, rotating... |
Same products
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан | |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |