Brass Valves & Pipe Fitting
Ningbo JKlong devotes to the R&D, manufacturing, marketing and after-service of brass valvesand cast iron valves. The products are widely used in the fields of water supplying and drainage system, gas system, urban heating, HVAC and ancillary products etc., which mainly cover ball valves, gate valves, stop valves, heating equipment and sanitary wares, water meters and various kinds of brass fittings. As a big and competitive brass valves manufacturer, Jintian copper have operations throughout China and our sales network spreads across 32 provinces with nearly 400 sales outlets, ranking top in the field of civil low and medium pressure brass valve processing in China.
Types of Brass Valves and FittingsFor Sale
Brass Ball Valve:
Brass ball valve, evolved from cock, is used to cut off, distribute and change the flow direction of medium. The ball valve designed as V-shaped opening also has good flow regulation function.
Brass Gate Valve:
Brass Gate valve refers to the valve whose closing part (gate) moves along the vertical direction of the channel axis. It is mainly used as the cutting medium on the pipeline, that is...
Brass Check Valve:
Check valve refers to a valve whose opening and closing parts are circular valve discs and act by their own weight and medium pressure to block the backflow of medium.
Brass Float Ball Valve:
Brass Float ball valve is a valve composed of curved arm and floating ball, which can be used to automatically control the liquid level of water tower or pool. It has the characteristics of simple..
Brass Angle Valve:
Brass angle valve is an angle stop valve. Angle valve is similar to spherical valve. Its structure and characteristics are modified by spherical valve. This is because the pipe forms a 90 degree...
Brass Stop Valve:
Brass Stop valves are used to regulate fluid flow and shut off fluid (ball and gate valves should always be preferred even for shut-off operations). The stop valve is a two-way valve...
Brass Strainer:
Brass strainer(brass filter) is an indispensable device on the transmission medium pipeline. It is usually installed at the inlet of pressure reducing valve, pressure relief valve, constant water level...
Brass Pressure Reducing Valve:
Brass reducing valve is used to control the opening of the opening and closing parts in the valve body to adjust the flow of the medium and reduce the pressure of the medium.
Brass Manifold:
As a Brass manifold connecting the water supply and return of each loop heating pipe, the water collector is an equipment in the floor heating system and plays a pivotal role.
Brass Bibcock
It is a device to open and close water medium and control outlet water flow and water temperature.
Brass Gas Valve
Gas valve is a new type of safety supporting device for gas pipeline engineering; It is used to cut off, connect and regulate the gas in the pipeline, with good control characteristics and sealing...
Brass Flanged Valve:
In general, flanges are used one-to-one rather than individually. Flanges are usually used to connect pipes. Flange valves and threaded valves are mainly connected in different ways, and other working...
Brass Fittings:
Brass fittings are the collective name for the parts of the piping system that play a role in connecting, controlling, diverting, diverting, sealing, supporting, etc. The main categories are elbow, direct, reducer and tee. Used to connect copper pipes, iron pipes, PPR pipes, ABS pipes, etc.
Brass Valves and Fittings FAQs
How do you Connect a Pipe to a Valve?
The valve is connected to the pipe using pipe threads. ... Most valves employ the tapered thread type. The valve is welded directly to the pipe. This connection is usually used where perfect shutoff of leakage is crucial, Most common on urban water and sewerage and gas pipelines
Flanged connections are the most common method of connecting valves to piping systems regardless of pressure levels and valve size. They are made by using two flanges, which are attached using stud bolts and nuts. They are quick and easy to assemble and disassemble for repair or replacement purposes.
How to Clean Brass Valves and Fittings?
There are several processes of cleaning brass gas valve fittings. If you can disconnect your brass ball valve from the pipeline, take it to a sink and run water through at as high pressure as possible. If this does not clear the blockage in the brass valves and fittings, use a small brush (like a toothbrush) and dish soap to loosen and push out the blockage.
Spray the lubricant onto the valve where the valve handle enters the actual valve body and let it sit for about 20 minutes. Then, try loosening the valve by hand again. If it doesn't move, or is still difficult to turn, tap it lightly with the hammer.
How to Choose Pipe Brass Valves and Fittings?
If you want to know more about brass valve price, please contact us.
As the china copper industry group limited, we can offer kinds of copper press fittingsfor sale, anything you need, please leave us a message.
Send product request
Other supplier products
 |
Lead Brass Plate | As a specialized brass plate manufacturer, we produce the lead brass plates are mainly used in key products such as locks, gaskets, washers and oth... |
 |
Hard-drawn Copper Wire (3mm) | As one of the well-known hard drawn copper wire suppliers, we produces 3mm solid copper wire, which can be widely used in industries such as transp... |
 |
Bare Copper Wire (8mm) | The electrical round copper wire productsproduced by our company are widely used in industries such as transposed conductors, ultra-high voltage ca... |
 |
Copper & Brass & Bronze Rod & Wire | HIGH PRECISION WIRE&ROD BRANCH, specializes in ordinary brassrods & wires, lead brass rods &wires, lead free brass rods &wires, com... |
 |
Brass Check Gate Valve JKL-9169 | The gate valve with check function is easy to install, which can reduce one check valve and save cost. We have various materials, such as HPb59-1, ... |
Same products
 |
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан |
 |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
