Low Dth Hammers
ANBIT Series DTH Hammer, a kind of valve-equipped Low-Air-Pressure hammer with a single piston, a plate valve and a central exhaust structure.The compressed air is adopted as the driving force. To prevent dust pollution and get a better performance, some high-pressure water may be added into the air for wet rock DTH drilling.
Product Description
Product featured :
The strong energy of single impact and the low energy consumption in rock crushing;2. The weight ratio of Piston and Bit almost Reaches 1:1 to provide long effective acting time, which leads to the improved efficiency in rock crushing and the extended service life of the drilling tool;3. A good performance in central air exhaust and cuttings discharge, which reduces the repeated crushing of rock;4. A check valve device is available to drill holes finder water.The ANBIT Series DTH Hammer, an ideal drilling tool, is widely used in such industries relating to energy, transportation,metallurgy,building etc.
Specification
|
Length |
870(mm) |
||
|
Connection Thread |
F48x10 PIN |
||
|
External Diameter |
82(mm) |
||
|
Weight |
24(KG) |
||
|
Hole Range |
90-120(mm) |
||
|
Working Pressure |
10-13(Bar) |
||
|
Air Consumption |
8-10 (m³ / min) |
||
|
dirll Tail rod |
CIR90 / M3 |
||
|
1、Connection |
ANBIT3-01 |
9、Reed spring |
ANBIT3-09 |
|
2、O type ring |
ANBIT3-02 |
10、Guide sleeve |
ANBIT3-10 |
|
3、top |
ANBIT3-03 |
11、"O"ring |
ANBIT3-11 |
|
4、check valve |
ANBIT3-04 |
12、front top sub |
ANBIT3-12 |
|
5、spring |
ANBIT3-05 |
13、stop ring |
ANBIT3-13 |
|
6、valve seat |
ANBIT3-06 |
12、front top sub |
ANBIT3-14 |
|
7、Cylinder |
ANBIT3-07 |
15、outer tube |
ANBIT3-15 |
|
8、piston |
ANBIT3-08 |
ABT Drilling Equipment Co., Ltd. mainly provides drilling rig equipmentto help you solve the problem of drilling at high efficiency and low cost.Always feel free to inquiry!
Send product request
Other supplier products
 |
Big Taps | Accidents occasionally occur during the construction of the submersible drilling, when the bit falls into the hole, which not only damages the tool... |
 |
Eccentric Overburden Drilling Equipment | Eccentric drillingis used for casing following drilling while drilling in soil layer. Product DescriptionSpecification Operating Steps of Eccentric... |
 |
R.C. Hammer | RC Hammer ABT's low-pressure impactor is suitable for application needs working pressure. It uses low-pressure air to push the piston to hit the d... |
 |
Eccentric Overburden Drilling Equipment | Eccentric drill bit is used for casing following drilling while drilling in soil layer. Product Description Specification Eccentric Reamer System ... |
 |
NRC Reverse Circulation Hammer | Transannular counter-circulation impactor is also called hollow type impactor, the center is through the round hole, can obtain the complete core o... |
Same products
 |
Hole Opener Bit | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | Hole Opener Drill Bit The following pipe bit is mainly used to drive iron pipe to drill together ... |
 |
Hand Hammer Drill | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | The hand hammer drill machinehole diameter is 19 ~ 42mm, and the hole depth is up to 5m, usually ... |
 |
Hammer | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | ABT supplies a series of DTH hammers for sale. All DTH hammer drills features high energy-efficie... |
|
|
Eccentric Overburden Drilling Equipment | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | Eccentric drillingis used for casing following drilling while drilling in soil layer. Product Des... |
 |
Diamond Reaming Shell | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | Specification Specification of Diamond Reaming Shell Category Bit Size (mm) PDC reaming s... |
