LSZ92/188 PVC windowsill board production line

1.LSZ92/188 PVC windowsill production line 2.max. capacity:200-600kg/h 3.stacking length:6m 4.low ennery cost Technical Parameters 1. SJSZ-92/188 conical twin screw extruder 1set • Screw diameter: 92/188 • Material of the screw : 38CrMoALA • Power of the main motor: 110kw (AC ) • Max output: 500-700kg/h • Cooling mode of the screw: self-cooling by the internal circulation of the oil in the core • Heating zones and power of the barrel : 7zones 36kw • Cooling mode of the barrel: 0.25kw*3 0.37kw*1 • Electric parts/components: well-known brand : like OMORN, SIEMENS, SCHNEIDER etc. 2. ZDM-800 vacuum calibration table • Power of the vacuum pump:5.5kw*2 7.5kw*2 • Power of the water pump : 4kw*1 2.2kw*1 • Length of the table :8000mm • Max exhausting air: 180m³/h • Adjusting mode of the calibration of the table : forward-backward movement by motor:2.2kw Up-down movement: by reducer (4 motor –driven ) Left-right movement: by manual 3. QYY-800 haul-off machine • Max hauling force:50000N • Max hauling speed: 0.1-3.5m/min • Width of the belt: 800mm • Effective length of the belt: 2800mm • Clamping mode : pneumatic 4. QGY-800cuting machine 1set • Cutting direction of saw blade: horizontal • Moving speed: 1.1kw from left to right • Power of the cutting machine motor:2.2kw • Max cutting length : (width*thickness): 800*65mm • Diameter of the blade: 350mm • Cutting time and moving length : 1-5sec, 0-500mm • Type of the length calculating: digital meter • Equipped with dust sucking device: 1.5kw blower, round bags 5. stacker • Power source of the stacker: cylinder power(4, 50*500) • Device :6 stainless roller • Applied air pressure: 2±0.5MPa

Other supplier products

	Accessary Machineries
	PPR Hot and Cold Water Pipe High-speed Extrusion Line	Main Technical Data: Model/Sepc. Diameter Range (mm) Extruder model Line speed (m/min) Max. Capacity (kg/h) Installed power (KW) LPG65/30 20-63 L...
	PET/PBT Single Layer/Multi-layer Sheet Extrusion Line	This extrusion line is specially designed for PET mono or multi-layer sheet production. .PET sheets produced by this line can be processed to be ...
	Single-wall corrugated pipe extrusion line	Single-wall corrugated pipe extrusion line: it mainly uses PE, PP, PVC as raw material, through the corresponding moulds inside and outside p...
	Sheet ExtrusionLine

All supplier products

Same products

	Tubular Stranding machine use bearing 537238	Seller: JinHang Precision Bearing Co.,LTD	The Strander roller bearings Z-537238.ZL can be lubricated from the end faces using grease or oil...
	Cable strander high speed bearing Z-537025.ZL	Seller: JinHang Precision Bearing Co.,LTD	Single row cylindrical roller bearings Z537025ZL with cage are units comprising solid inner and o...
	Tubular twister roller bearing Z-549124.ZL	Seller: JinHang Precision Bearing Co.,LTD	Z-549124.ZL Special roller bearings Z-549124.ZL consists of an inner and/or outer ring and a comp...
	Cylindrical roller bearing Z-548410.ZL Tubular twister	Seller: JinHang Precision Bearing Co.,LTD	The cylindrical roller bearings Z-548410.ZL have high rigidity, high radial load carrying capacit...
	Annulus ring gear for jcb 3cx 4cx backhoe loader	Seller: Shandong Prior Machinery Manufacturing	Type: Annulus /Internal ring gearPART NO.: 450-10205 APPLICATION: REAR WHEEL PLANETARY HUBModel: ...