Pcd boring tools for finishing Crankshaft hole
Processing principle:
The distal end is first processed with a short guide bar knife, and then the other four gears are processed at one time with the distal hole as the support.
The machining center solution does not require a remote support bearing
Parameter:
Linear velocity Vc(m/min): 250
Cutting tools diameter(mm): 58
Rotate speed (1/min): 1373
Teeth number: 1
Feed per teeth fz(mm): 0.1
Feed F(mm): 137
Cutting-in Ap(mm): --
Send product request
Other supplier products
 |
PCD grooving tools | PCD grooving tools are used for finishing processing ring grooves of piston. Specification More Superhard grooving tools are successfully used in m... |
 |
Single crystal chamfering tool | Specification: 0 to 90 degrees Material: Element Six Single Crystal Diamond, South African natural diamond. Tool bar size: customized Tool holder m... |
|
|
Diamond chamfering tool | Specification :0 to 90 degrees Materials: Element 6 single crystal diamond, South African natural diamond. Tool rod material: tungsten steel Speed:... |
 |
PCD Reamer for Valve Ports | FromMore Super Hard, you can get a PCD reamer with high accurate, reliable quality and economic to solve your problems in bores machining. Simple P... |
 |
PCD Reamer for Gearbox Supported Hole Finishing | PCD Reamer From“More Super Hard”, you can get a PCD reamer with high accurate, reliable quality and economic to solve your problems in ... |
