.

SKR51+ Rebar Location System

Purpose
SKR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete.
Specification
JGJ/T152-2008
Performance
 Longer service life of the Connector Clip: The instrument has long service life because of using Lemo Connector Clip which comes from Swiss and uses for aircraft industry.
 Good quality of signal cable: The signal cable has long service life because of its flexible and substance.
 High precision and stability: The instrument can locate the steel-bar accurately and quickly.
 Longer service life of the sensor: Improve the service life by paste abrasion resistance allowance bottom of the sensor
 Single sensor: No-change sensor in test, switching between high and low test range can assure the precision of test data and the test depth.
 Display test information real-time: Display the test data directly to avoid man-made errors.
 Grid and section scan mode: Instrument can display steel bar distribution and scan steel bar without concrete boundary limited.
 Three-wheel steel-bar scan system: The system can assure scan path along line and the precision of test data.
 Powerful Windows data process and analysis software: Software can display analysis result by diagram. Test data can be export to word or Excel easily.


Send product request

To: Beijing SKE Technology Co.,Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

SK-225 concrete test hammer
SK-225 concrete test hammer Brief introduction: The test hammer submits to standard of GB/T9138-1988 and JJG817-93 and JGJ/T23-2001. NJ-225 concrete test hammer is applied to ...
SK-RCM Rapid Concrete chloride migration tester
SK-RCM Rapid Concrete chloride migration tester Detection method: Electromigration method (RCM) Executive Standard: NT BUILD 492(Chloride Migration Coefficient from Non – Steady - State Mig...
SK-40/60 Multifunction strength tester
SK-40/60 Multifunction strength tester Executive standard (CECS69:94) Technical specification for inspection of concrete strength by pull-out post-insert method (JGJ 110-2008) Testing st...
SK225-V digital voice test hammer
SK225-V digital voice test hammer Brief introduction: Test hammer SK225-V submitted to GB /T9138-1988, JJG817-93 and JGJ/T23-2001 standards. The instrument is useful for quality In...
SK225-S digital voice test hammer
SK225-S digital voice test hammer Brief introduction: NJ225-S test hammer submit to standard of GB/T9138-1988 and JJG817-93 and JGJ/T23-2001. Automatically calculate data and on sit...
All supplier products

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 Seller: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A Seller: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A Seller: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH Seller: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S Seller: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...