GDY-1A Gasoline Jet Fuels Diesel Oil Coal Coke Calorific Value Tester/Bomb Calorimeter
Introduction:
GDY-1ACalorific Value Tester is designed and made as per national standards of People’s Republic of China GB/T213-2008 Test Method for Calorific Value of coal, GB/T384-1988 Test Method for Calorific Value of Petroleum Products and Calibration Regulation of People’s Republic of China JJG672-2001 Oxygen Bomb Calorimeter, as well asShanghai enterprise standard Q/YXYY 10 XRY Series Oxygen Bomb Calorimeter.
The heat capacity ofGDY-1A Oxygen Bomb Calorimeter is 14400 J/K~14500 J/K, and it is suitable to determine calorific value of combustible materials such as petroleum products without water (gasoline, jet fuels, diesel oil and fuel oils, etc.), coal, coke and paraffin, etc.
Main Technical Features:
1. GDY-1ACalorific Value Tester adopts sealed oxygen bomb. The whole structure adopts stainless steel material. The strength is enough to resist the max pressure (60~70 atmospheric pressure) when the solid burning. And it can resist the bigger pressure when liquid fuel burning.
2. The inner water cylinder is composed of stainless steel sheet.The cross section is pyriform and the capacity is 3kg. The water cylinder is equipped with electric stirrer inside. It ensures the temperature in the water cylinder uniform.
3. The external water jacket is double layer container. It filled with water when doing determination.It make the water temperature in the cylinder uniform by water jacket stirrer and form the constant temperature environment meeting the requirements of test.
Main Technical Specifications:
| 1 | Heat capacity | 14400 J/K~14500 J/K |
| 2 | Resolution | 0.001 K |
| 3 | Measurement accuracy | ± 60J/g |
| 4 | Repeatability | ≤0.2% (Grade C) |
| 5 | Pressure endurance of oxygen bomb | 20 MPa |
| 6 | Temperature measurement range | 10 °C~35 °C |
| 7 | Ambient temperature | 20±5 °C, the fluctuation is not more than 1°C during a test |
| 8 | Data saved | 31 pieces |
| 9 | Relative humidity | ≤85% |
| 10 | Power supply | AC 220V±5%, 50 Hz |
| 11 | Dimension | 600mm×460mm×430mm |
Send product request
Other supplier products
 |
GD-0719A Automatic Wheel Tracking Device for Road Paving | Purpose: GD-0719A Automatic Wheel Tracking Device is designed and made as per T0719 "Bituminous Mixture Wheel Track Test" in the Industry Standard ... |
 |
GD-0193 Oil Stability Index Measurment Equipment | I.Summary GD-0193 Oil Stability Index Measurment Equipment Equipment is designed and made as per industrial standard of People’s Republic of ... |
 |
GD-2430 Freezing Point Tester for Jet Fuel | Purpose: GD-2430 Freezing Point Tester isdesignedandmadeaccordingtotheGB/T2430,GB/T3145,SH/T0090,andtochoosedifferentconfigure,maydeterminatejetf... |
 |
GD-6532 ASTM D6470 Salt in Crude Oils Analyzer by Potentiometric Method | Introduction GD-6532 ASTM D6470 Salt in Crude Oils Analyzeris designed and made as per national standard of People’s Republic of China G... |
 |
GD-8018D Oxidation Pressure Vessel for ASTM D525 | I. Summary GD-8018D Oxidation Pressure Vessel for ASTM D525 is designed and made as per the national standard of People’s Republic of China G... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
