Sulfur content analyzer in petrol products (X-ray spectroscopy methods)
Scope of application
Sulfur content of petroleum products tester (X-ray spectroscopy) People's Republic of China in accordance with requirements of the standard GB/T11140, GB/T17040, ASTM D4294 specified in the design and manufacture of this instrument for the determination of trace sulfur content in petroleum products. Because it uses physical analysis methods, analytical speed, without complicated sample preparation, high precision, human error, low labor intensity, no pollution, it has been widely applied and basic replace other measuring sulfur in the international arena methods of analysis.
Function characteristics
1, English operating system, man-machine interface of friendly exchanges. 2, detection time is short, the automatic test results within 30 seconds; automatic C / H ratio correction for multiple samples; 3, large-screen LCD display, automatic print measurement data; 4, using the X-ray tube excitation, the instrument can be used for a long while without source attenuation effects; 5, use of physical methods of analysis, the analysis does not contact does not destroy the sample, without chemical reagents; 6, instrument with integrated design, easy maintenance;
Technical parameters
1, The scope of analysis: S analytical range can be adjusted by calibration curve method selected.
2, The width of the scope of analysis: S max-S%% min9.999%; such as oil: S: 0.001 to 9.999%
3, The inherent error, the accuracy of analysis: such as oil: in line with The national standard GB / T 17040, also comply with The relevant requirements of The American National Standards ASTM D4294.
4, System analysis time: 1 ~ 999 seconds, The recommended value is 60 seconds.
5, The detection limit: 10ppm
6, The conditions: Ambient temperature: 5 to +40 ° C, Relative humidity:85% (30 ° C) Power supply: 220V ± 20V, 50Hz.
7, Total power consumption: <150W.”
Send product request
Other supplier products
Portable octane number analyzer | Measuring compliance with octane number: ASTM D 2699-86, ASTM D 2700-86 diesel cetane measuring compliance with ASTM D4737-03, ASTM D 613, EN ISO 5... | |
Karl fischer titrator | Test Methods for Water Content of Liquid Petroleum Products (Karl Fischer Methods)”.It is suitable todetermine water content in the liquid pe... | |
Octane number analyzer (motor / research method) | Gasoline octane (gasoline label) is used to indicate a contract value of gasoline antiknock properties of motor gasoline the most important indicat... | |
Diesel oil cetane rating analyzer cetane number analyzer | Cetane machine in accordance with ASTM D613, GB/T386 or standards fixed ignition lag measured cetane number of diesel and biodiesel, this product i... | |
Octane number analyzer (motor / research method) | Scope of application Applied to "gasoline octane machine assay (MON)" GB/T503, "gasoline octane machine assay (research)" GB/T5487, andASTM D2700, ... |
Same products
Disposable Dental Needles | Seller: Shanghai Kohope Medical Devices Co., Ltd. | The dental needles manufacturing, also named disposable dental needles and tooth needles, are ass... | |
ULTRASONIC STEEL PIPE TESTING EQUIPMENT | Seller: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | Ultrasonic pipe testingwith ultrasonic pipe inspection equipmentrefers to a non-destructive testi... | |
STEEL PIPE STORAGE RACK | Seller: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | Metal Pipe Storage Racks This ms pipe storage rackmachine serves as a storage system for inspect... | |
STEEL PIPE ROTATING ROLLER TABLE | Seller: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | This equipment is suitable for the detection and repair welding process in the production of spir... | |
STEEL PIPE END EXPANDING MACHINE | Seller: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | Pipe expanding machineis a professional equipment for expanding and rounding the end of spiral su... |