Hollow glass dew test instrument
Standard:
GB/ t11944-2012 "hollow glass" about dew point measurement section.
Application:
It is used to detect whether the surface of the hollow glass sample is exposed under standard conditions and methods.
Description:
The imld-b hollow glass dew point instrument is an instrument manufactured according to the technical conditions specified in GB/T 1194-2012
features:
1. Using semiconductor tertiary refrigeration technology, refrigeration temperature can be set and control precision, cooling speed, convenient operation, not only can be used in the test room, and can be tested at the scene, do not need to use volatile dry ice, convenient use and low cost.
2. The probe and refrigeration unit can be completely separated, convenient and practical and not subject to the direction of the test piece.
3. The integration of the power, cooling, cycle and control system, realize the whole process of automatic control, chassis and probes are connected by a hose, when detecting probe face contact with the specimen, probe face to any direction.
4. Pt100 temperature probe is adopted, with high precision and accurate data.
5. Temperature control adopts microcomputer temperature control PID control technology with high temperature control precision and high temperature stability.
Technical parameters:
1. The temperature measuring probe job: - ~ 60 ℃ and 40 ℃
2. Measurement probe diameter: 50mm.
3. Digital display thermometer range: - 65 ℃ to + 50 ℃ (note: measuring range adjustable)
4. The temperature resolution: 1 ℃
5. Specimen size: 510mm * 360mm.
6. Control box size: 470mm * 550mm * 700mm.
7. Test environment: temperature: 23 ℃ + 2 ℃ relative humidity: 30% ~ 75% RH
8. Test time
| Sheet glass thickness/mm | Contact time/minute |
| ≦4 | 3 |
| 5 | 4 |
| 6 | 5 |
| 8 | 7 |
| ≧10 | 10 |
.
Send product request
Other supplier products
 |
Reciprocating Abraser | IntroductionFixed sample on a horizontal table, wearing it under the specified abrasive and load with the horizontal movement of the platform. Acco... |
 |
Buy Dry Microbial Penetration Resistance Tester | The resistance to dry microbial penetration test (ISO 22612) evaluates resistance characteristics of protective equipment to dry bacteria-carrying ... |
 |
iec60529 glow wire equipment | Brief IntroductionThe glow wire tester operation instructions according to the GB5169 and GB4706the design and manufacturing requirements with the ... |
 |
New Design Digital fabric hydrostatic head pressure test machine | Hydrostatic Head Tester, used for determining the resistance of fabrics (canvas, coated fabrics, cover cloth, rainproof clothing fabrics, and geote... |
 |
Precision Fiber Microtome | 标准： ASTM D2130、BS 2043、DIN 53811、ISO 137、IWSTM 24、IWTO 8-6 应用： 精密纤维切片机用于制作精确的纤维横截面样本，以便在显微镜下进一步检查。可制作厚度从 10 微米起的纤维横截面，以供显微镜检查、测量和识别。 ... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
