astm d3786 hydraulic bursting strength tester
Digital bursting strength tester is used for the detection of woven, knitted, non-woven fabrics, paper or board about the bursting strength and height.
Standards：
GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108
Scope of application:
Digital bursting strength tester is used for the detection of woven, knitted, non-woven fabrics, paper or board about the bursting strength and height.
Instrument features:
A. Meet the maximum 100cm2 test area
B. Uniform clamping force, can be applied to all kinds of materials in all directions
C. Support online communication
D. Experimental area can be replaced, suitable for different standards
E. Store 50 custom standards
F. Test results such as: rich burst strength, bursting strength, diaphragm pressure, bursting height, and bursting time; make quality control personnel comprehensively understand the bursting performance of the sample.
G. Security shield automatic detection can automatically correct and exclude the film itself on the results
Technical Parameters:
A. Pressure: air pressure method
B. Measuring range: 0-1000kPa, accuracy: 0.2%
C. lower clip ring: 7.3cm2, 7.8cm2, 10cm2, 50cm2, 100cm2
D. Maximum expansion: 70 ¯ 0.02mm
E. Pressing rate: 1 ~ 100 kPa / min, speed adjustable
F. Output: print output, display output, real-time color graphics display
G. Power supply: Ac220V 50Hz 2000W
Instrument Configuration:
1. One host
2. A set of the next clip ring (5)
3. Expanded broken film 1 package
4. Silent pump 1 set
5. Glycerine 1 bottle
6. Test rubber film （2 pieces）
7. Mute laboratory air compressor (optional)
Send product request
Other supplier products
 |
ICI Mace Snag Tester | ICI Mace Snag Tester is suitable for the snagging performance test of knitted fabrics and woven fabrics in outwear as well as other fabrics easy to... |
 |
Chrysler Flex Fold Tester | Chrysler Flex Fold Tester Standards: Chrysler LP-463LB-9-01, Chrysler LP-463KB-13-01, Chrysler LP-463KB-10-01, IFAI J1531, Commercial Standard CS-2... |
 |
Testfabrics Multifibre No.10 | 测试标准： AATCC 15、AATCC 61、AATCC 101、AATCC 105、AATCC 106、AATCC 107、AATCC 132、ASTM D204 应用： 它可用于 AATCC 测试方法，以评估颜色转移的程度。 产品信息 ： 品牌：Te... |
 |
Vibration Fiber Fineness Tester | The vibration fiber fineness tester works based on the stringprinciple. First, it measures the natural vibration frequency of the fiber with known ... |
 |
Shoes Flexing Tester | It's used for determining the flexibility resistance and or indicating the cracks od shoe or shoe sole through reciprocating flexing movements unde... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
