dry cleaner equipment for testingdry cleaner equipment dry cleaning tester for testing and AATCC 162 tester
Dry Cleaning and Washing Cylinder, to determine color fastness to dry-cleaning and chlorinated pool water (AATCC 162), is applied to prepare samples for flammability testing of standard 16CFR-1610. Comprises stainless steel rotating test chamber of 7650ml capacity, variable speed drive with digital timer and displays. A drain valve is equipped in the bottom of the cylinder.
Testing Standards:
AATCC 162, 16 CFR Part 1610
Applications:
Dry Cleaning and Washing Cylinder is designed for determining color fastness to dry cleaning and chlorinated pool water. It also can be used to prepare samples for flammability testing.
Product Information:
Dry cleaning and washing cylinders are also known as dry cleaning tester and AATCC 162 tester. Dry cleaning and washing cylinder is used to test the color fastness of fabric to dry-cleaning and chlorine water washing. The Dry Cleaning And Washing Cylinder is comprised of stainless steel rotating test chamber with capacity of 7650ml, support frame, variable speed drive with digital timer.
Parameters:
1.Equipped with stainless steel rotating roller;
2.Height of tank: 330mm;
3.Diameter of in-tank: 220mm;
4.Rotating speed can be adjusted according to customer's requirements;
5.Overall dimension: 720×490×620mm(L×W×H);
6.Equipped with digital timer and displays;
7.Weight: 98kg.
Operation
Clean the dry cleaning cylinder
Prepare the hardness concentrates according to the relevant standards.
51 ml of the hardness concentrate was diluted to 5100 ml with distilled or deionized water.
If necessary, adjust the pH of the solution to 7.0 with sodium carbonate or acetic acid.
5000 ml of the solution (made in the above 3) was charged into a dry-cleaning cylinder. The temperature was adjusted to 21 ° C.
Put the color test sample with the standard test fiber into the cylinder, turn off the barrel, and roll for 60 minutes.
Get out the sample and remove the excess solution.
Technical Parameters
Items Parameters
Dimension 72L X 49W X 62H (cm)
Structure Stainless steel
Surface treatment Wiredrawing treatment
Transport weight 80kg
Power supply 220V 50HZ max.0.05A
Other supplier products
|
fabric vertical flammability tester |
VTEC Vertical Flammability Chamber:
Testing Standards: ASTM D6413-99, DOC-FF 3/71, CALIF TB-117, GB/T 5455, CPAI-84
Applications:
Vertical Fla... |
|
ICI Mace Snag Tester |
ICI Mace Snag Tester
Testing Standards:ASTM D3939, GB/T 11047
Applications:
ICI Mace Snag Tester is designed for rapidly determining the tendency o... |
|
Universal finger friction tester |
Brief IntroductionThe main working principles of this device is through a test head, plus a certain amount of pressure, and carry a variety of stan... |
|
Zipper Testing Machine of Reciprocating Pull |
Zipper Testing Machine of Reciprocating Pull
Testing Standards:
QB/T 2171/2172/2173, BS 3084, AS 2332, NF G91-005, JIS S3015, DIN 3419-1, SATRA TM5... |
|
Radiant Protective Performance Test Device |
Standardized sample clamping program, strictly meet the standards. While taking into account the operation, is simple and generous. The calorimeter... |
All supplier products
Same products