Temperature and Humidity Alternating Test Chamber for Automotive Wires
The temperature and humidity alternating test chamber for automotive wires conducts temperature and humidity alternating tests on automotive wires.
Main Components:
Touch - screen temperature and humidity controller, compressor (Tecumseh, France)
Specification Table of Programmable Constant Temperature and Humidity Test Machine:
1. Temperature range: - 40~100℃ (150℃) 2. Humidity range: 30%RH - 98%RH 3. Stability: Temperature ±0.2℃, humidity ±2.5%RH 4. Heating and cooling time: Linear cooling 5. Inner box material: First - grade mirror - finished stainless - steel plate (SUS304) 6. Outer box material: Stainless - steel with matte surface treatment (SUS304) 7. Refrigeration system: Air - cooled, two - stage, fully - enclosed compressor 8. Thermal insulation materials: Rigid foam and glass wool 9. Protection devices: Non - fusing switch, compressor overload protection switch, refrigerant high - pressure protection switch, overtemperature fuse, water pan water - shortage protection switch, electromagnetic protection switch, fault warning system 10. Accessories: Viewing window, two adjustable upper and lower partitions, one 50mm test hole, internal box light 11. Inner box (cm): 40×50×50 H×W×D Outer box: 120×162×106 H×W×D 12. Power supply: 3 - phase AC380V/415V±10% 60HZ
Send product request
Other supplier products
 |
Jis rubbing fastness tester | JIS rubbing colour fastness tester is a standard testing machine, based on the friction tester type II (Gakushin type) specified in the "Test Metho... |
 |
Leather edge oil fatigue testing machine | Product Introduction: Leather edge oil is made of polyvinyl chloride and other resins, used to coat leather, recycled leather, artificial/a colore... |
 |
Car seat fatigue tester | Applicable standards: GB/T 18941-2003 "Test method of foam polymer materials for car seats" : This standard specifies the test method of foam poly... |
 |
Anti-fatigue Test Bench For Automobile Steering Machine | The vehicle steering system test bench (hereinafter referred to as the test bench) can simulate the torque input, load and environmental condition ... |
 |
Nail Hammer Snag Tester | The nail hammer snag tester is mainly used to evaluate the ability of fabrics to resist snag. Structure and principle Structure: It is generally... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
