Scorch Tester Sublimation fastness tester
In the daily process of shaping and high temperature ironing, dyes heat stability will affect the appearance of fabrics.. Dyes heating , heat transfer properties will cause the change of fabric color.
Sublimation fastness tester (large) is used to determine the hot pressing ironing and dry heat (sublimation) color fastness properties for all kinds of dyed printing material and fabrics, it also can be used for determination the resistance to chlorine damage, textile bleaching products, scorch yellowing test, disperse dye sublimation fastness test, dye fastness test, high temperature dimensional stability. It is commonly used in printing and dyeing fabrics, textile auxiliaries clothing industry.
Standard
GB/T 5718.GB/T 6152.JIS L0879.JIS L0850.ISO 105 P01.ISO 105 X11.AATCC 117.AATCC 133. AATCC 92(G247)，AATCC 114(G247)，M&S C13(G247B)，M&S C10(G247B)
Features
Single work station easy for operation, high cost performance, Multi work station type can raise the efficiency and also meet M&S standard.
Upper and lower heat board control temperature separately , accurate temperature control, timing alert, control testing time exactly.
Heating board distance is adjustable, suitable for specimen of different thickness, High efficient insulation material ensures the safety operation.
Technical Parameters
| Parameters | G247 | G247B |
| Heating board area | 100mm×40mm | 210mm×210mm |
| Heating board material | Aluminumplate | Aluminumplate |
| Pressure | 4kPa±1kPa | 4kPa±1kPa（Fullarea） |
| Temperature heating range | Roomtemp.-300°C | Roomtemp.-300°C |
| Temperature control stability | ±1°C | ±1°C |
| Test Application | Hotpress,dryheat,chlorinedamage | Hotpress,dryheat,dimensionstability |
| Size | W250×D300×H230mm | W345×D520×H320mm |
| Weight | 9kg | 12kg |
Send product request
Other supplier products
 |
Scratch tester | Product Introduction: With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of mo... |
 |
Large diameter blasting test machine/ Large Diameter Pipeline Burst Tester / High Pressure Pipe Burst Testing Equipment | Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurab... |
 |
Wire Torsion Tester | Applicable standards: GB/T 239.1-2012 "Metal materials wire Part I unidirectional torsion test method" GB/T 239.2-2012 "Metal materials wire Part... |
 |
BBA steady state solar simulator tester | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photovo... |
 |
Protective Dlothing Splash Spray Liquid Thickness Tester ISO 6529-2013 BS EN 463-1995 | Standards GB 24540-2009《protective clothing against liquid acids and alkalis 》Appendix D ISO 6529-2013 Protective clothing-protection against chem... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
