Pinch Fold Tester

• 

Standards:

LP-463KB-28-01 Method C，TSL 5100G Section 4.29

Applications:

This pinch fold tester is designed to conduct Chrysler LP-463KB-28-01type C measurement.

Product Information:

Introducing the Pinch Fold Tester, a state-of-the-art device designed specifically for measuring the tear strength of materials in accordance with Chrysler's LP-463KB-28-01 Method C standards. This innovative testing machine is engineered to provide accurate and reliable results, making it an essential tool for quality control in the automotive industry and beyond.

The Pinch Fold Tester features a robust construction that includes an electric motor, a counter, and a velocity indicator, ensuring seamless operation and precise measurements. The testing process is straightforward: operators simply fix the sample in place, set the desired working period on the counter, and initiate the test with the press of a button. The machine automatically halts once the preset time is reached, allowing for efficient testing without the need for constant supervision.

One of the standout features of the Pinch Fold Tester is its adjustable spring and pressure plate, which applies a consistent pressure of 1.96 N to each sample. This ensures that every test is conducted under the same conditions, providing reliable and repeatable results. The operator can easily evaluate the outcome visually, making it user-friendly and accessible for technicians of all skill levels.

Whether you are involved in material testing for automotive interiors or other applications requiring precise tear strength measurements, the Pinch Fold Tester is your go-to solution. Its high-performance capabilities and ease of use make it a valuable addition to any testing laboratory. Experience the difference in quality and accuracy with the Pinch Fold Tester from Standard Groups.

Operation procedure:

Firstly, the operator should fix the sample and set the working period of the counter, then press the start button on the tester. It will automatic stop until the counter reach the presetting period. The operator can evaluate the result by eyes. By adjusting the spring and the pressure plate, the pressure on every sample is applied with the value of 1.96 N when the base board moves up to squeeze the sample.

Other supplier products

	Glove cutting resistance tester	Product Information: The machine is used to test the cutting resistance of gloves. Under the specified load, the blade cuts the sample to measure ...
	Bally Waterproofness Tester	Applications: Bally Waterproofness Tester is to test materials like coated leather, leather dynamic water penetration resistance ability. The ma...
	KES - FB2 - S Bending Tester	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rigid Plastics) SAE J2748 (Automotive Composite Flex...
	AATCC Accelerotor	AATCC Accelerotor - Textile and Apparel - standard Standards: ATCC 93,M&S P26,M&S P53,NEXT 31 Applications: AATCC Accelerotor, to...
	Pneumatic fabric stiffness tester GB / T18318.1-2009	Standards: GB / T18318.1-2009 "Determination of the bending length of textile fabrics" ZB W04003-87 "Fabric stiffness test method Slope cantilever...

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...