Sponge foam collapsible hardness tester

• 

Purpose:

This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane foam sample can be tested according to the national standard, and the compressive hardness of sponge, foam and other materials can be accurately measured. In addition, it can also be used to measure the specified compression hardness of the seat foam (such as backrest, seat cushion foam, etc.)， and accurately measure the compression hardness of each foam part of the seat.

How it Works:

The sponge foam compression stress test puts the sample between the upper and lower pressure disks, and when the upper pressure disks compress the sample of A certain size down to the concave degree specified by the A method (B method, C method) required by the national standard at the specified speed, the load element on the load cell will feedback the induced pressure to the controller for processing and display, so as to measure the collapsibility hardness of the sponge, foam and other samples.

Functional characteristics：

1. Automatic zero clearing: After receiving the test start instruction, the system automatically clears zero.

2. automatic return: after the sample is broken, it will automatically return to the initial position.

3. change the speed: The machine can change the test speed arbitrarily according to different samples.

4. indicating value verification: the system can achieve the accurate calibration of force value.

5. control method: According to the test needs can choose the test force, test speed, displacement and other test methods.

Technical parameter：

1. control mode: touch screen control;

2. induction mode: precision load element;

3. capacity: 200kg;

4. unit switch: Kg, N, LB;

5. pressure plate: diameter 200mm, bottom rounded R1mm;

6. lower platform: 420×420mm, porosity diameter 6mm, spacing 20mm;

7. the maximum stroke: 75mm;

8. test speed: 100±20mm/min;

9. power source: servo motor;

10. transmission mode: precision ball screw;

11. power source: single-phase, 220V, 50Hz/60Hz, 2.5A;

12. Weight: 160kg.

Other supplier products

	Sample cutter 100cm	Sample cutter 100cm - Other test instrument - standard Standards: Applications: The application of sharp cutter wide. Even difficult mat...
	Suture Needle Penetration and Bending Strength Tester	Suture Needle Penetration and Bending Strength Tester - Other test instrument - standard Product Information: The Suture Needle Puncture and Bend...
	Battery Adiabatic Calorimeter	Reference Standards GB/T 36276 - 2023 *Lithium - ion Batteries for Electric Power Energy Storage UL 9540A ASTM E1981 - 98(2012) SN/T 3078.1 - 201...
	Respiratory Resistance Tester	Respiratory Resistance Tester Introduction: The respiratory resistance tester is used to determine the inspiratory and expiratory resistance of re...
	Electronic crockmeter	Introduction AATCC rubbing color fastness tester is the official test equipment of the United States Textile Chemists Association and printing and...

Same products

	pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester	Seller: Kelilong Electron Co.,Ltd	Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent...
	ORP-2026S Waterproof Soil ORP and Temperature Meter	Seller: Kelilong Electron Co.,Ltd	范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV...
	TDS-2616 Waterproof EC/TDS/Temperature Meter	Seller: Kelilong Electron Co.,Ltd	Range EC ～19.9mS TDS Temp 0～50℃ R...
	EC-98330 CF ECOstick - Nutrient Tester	Seller: Kelilong Electron Co.,Ltd	Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el...
	PH-808 Waterproof Soil PH Meter	Seller: Kelilong Electron Co.,Ltd	Model PH-808 Range PH ～14.00PH Temp 0～50℃ ...