Battery Powder resistivity meter
Product Advantages
- Unmatched Measurement Flexibility
- Dual-probe compatibility: Switch seamlessly betweenfour-point probe(for low-resistance materials) andtwo-point probe(for high-resistance applications) to adapt to diverse powder types.
- Ultra-wide ranges: Handle pressures up to350 MPaand resistances up to1200 MΩ, covering R&D needs for conductive to insulating materials.
- Intelligent Automation
- Fully automated software with customizable parameters (pressure, duration, sampling rate) enablesone-click testing, reducing human error and accelerating workflows.
- Comprehensive Data Insights
- Real-time monitoring and export of9 critical parameters: Pressure, stress, temperature, humidity, thickness, resistance, resistivity, conductivity, and tapped density. Generate dynamic curves and auto-save reports for traceability.
- Versatile Testing Modes
- Three operational modes:Pressure step,single-point unloading, andsteady-state unloadingto simulate real-world compaction scenarios.
- Certified Calibration
- Pre-installedNIST-traceable calibration blocks(thickness and resistance) ensure measurement credibility and simplify third-party audits.
Product Features
- High-Precision Control: Advanced pressure regulation (±0.5% FS accuracy) and laser-based thickness sensing (±1 μm resolution).
- Material Compatibility: Optimized for lithium/sodium-ion battery cathodes/anodes (LCO, NCM, LFP, graphite), conductive additives, solid-state electrolytes, and micron-scale powders.
- Environmental Integration: Built-in sensors for temperature (-20°C to 150°C) and humidity (10%–95% RH) compensation.
- Data Management: Export test results in CSV/PDF formats or integrate via API with LabVIEW, MATLAB, or Python for advanced analytics.
- Ergonomic Design: Compact footprint with touchscreen interface and safety interlocks for hazardous material testing.
Technical Parameters
| Parameter | Specification |
|---|---|
| Pressure Range | 0–350 MPa (adjustable increments) |
| Resistance Measurement | 1 μΩ–1200 MΩ (10 nΩ resolution) |
| Thickness Accuracy | ±1 μm (laser sensor) |
| Temperature Range | -20°C to 150°C (±0.5°C accuracy) |
| Humidity Range | 10%–95% RH (±3% accuracy) |
| Data Interface | USB 3.0, Ethernet, RS-232 |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Dimensions (W×D×H) | 450 × 550 × 600 mm |
Accessories Included
- Main Unit: Powder Resistivity Meter with integrated safety enclosure.
- Software Suite: Multi-language GUI with data analysis tools.
- Probes: Two interchangeable probe sets (four-point and two-point).
- Calibration Kits:
- Thickness calibration block (certified by accredited lab).
- Resistance standard (10 Ω, 1 kΩ, 100 kΩ).
- Testing Jigs: Customizable powder cells for varying sample volumes.
- User Manual: Multilingual PDF with maintenance guidelines.
Send product request
Other supplier products
 |
Protective clothing water vapor permeable tester ASTM E90-00 ASTM E96 | Standards: ASTM E90-00 ASTM E96 JIS L1099A BS 7209 JIS L1099B Applications: Used for moisture permeability test of various fabrics, film materia... |
 |
Air Permeability Tester ISO 7231 ASTM D737 | Standards: BS 5636. JIS L1096-A, DIN 53887. ASTM D737. ASTM D3574. EN ISO 9237. GB/T 5453. EDANA 140.2. TAPPI T251. EDANA 140.1. ASTM D737. AFNOR ... |
 |
Compression Fatigue Testing Machine for Intervertebral Fusion Cages | Standard YY/T 0959-2014 (China): Specifies compression fatigue testing protocols for intervertebral fusion devices, including load ratios, frequ... |
 |
Sliding Bearing Fatigue Testing Machine | Material Research and Development During the research and development of new materials, this testing machine can be used to evaluate the fatigue p... |
 |
G651 national standard shoe bending tester | Product Introduction: National standard shoe bending testing machine is specialized in testing finished shoes and soles, after a long time, fixed ... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
