Helmets Designated Protection Areas Tester
Main Purposes
1. Used to mark test points and test lines on helmets.
2. Used for line - marking according to different test standards.
3. Used to define the upper and lower fields of view as well as the left and right fields of view of helmets during research and development.
Applicable standards:
According to GB 811-2010 standard requirements.
Technical parameters of field of view
Upper field of view: 7º;
Lower field of view: 45º;
Left and right field of view: 105º;
Characteristics:
Infrared emitter;
Aluminum bracket (adjustable);
Angle of infrared bracket can be adjusted;
Aluminum alloy is used in the machine and all the accessories;
Main machine performance characteristics:
Adjustable handles on the arm can be easily adjusted to apply to different testing standards.
The fixed point tracking indicator adopts infrared control, which can be moved on the machine to find the base plane and reference plane easily.
The head support is made of steel with galvanized surface treatment, and there is a limiting device every 45°, which can easily rotate the head in any direction to adapt to different test points and test standards.
Send product request
Other supplier products
 |
Automatic Reaction Calorimeter | Product Features： 1. It offers three calorimetry methods: heat - flow, power - compensation, and reflux, allowing users to choose according to the... |
 |
Upper Leather Flexing Tester | Main uses: VAMP VAMP leather extension testing machine with a certain frequency of zigzag test, observe the change of the surface of the test piec... |
 |
Automatic Reaction Calorimeter/ Fully Automated Calorimetry System/ Fully Automated Calorimetry System | Product Features： 1. It offers three calorimetry methods: heat - flow, power - compensation, and reflux, allowing users to choose according to the... |
 |
Automatic voltage internal resistance tester | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 3611: Calibration of Measuring Instruments ... |
 |
Digital display electronic ink viscosity meter | Standard: ISO 12644 How it works: The working principle of the digital display electronic ink viscosity meter is based on two tin （usually a met... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
