Total Hip Joint Prostheses Wear Tester
Standard
- YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prostheses, including angular motion, loading modes, and environmental conditions.
- ISO 14242-1:2014 (International): Defines protocols for simulating physiological loading and kinematics during hip joint wear testing.
- ASTM F3047M-15: Additional compliance for advanced testing scenarios including edge loading and micro-separation.
Product Advantages
- Triaxial Motion Simulation: Replicates full physiological motion profiles (flexion/extension ±100°, abduction/adduction ±30°, internal/external rotation ±40°).
- Dynamic Load Control: Dual-peak loading up to 4,500 N with 0.1% force accuracy.
- Biorelevant Environment: Temperature-controlled (37±2°C) lubrication bath with 30±2 g/L protein concentration.
- Extended Durability: Capable of 5+ million cycle testing with <0.5% drift in calibration.
- Automated Compliance: Pre-programmed ISO/YYT test protocols with real-time data validation.
- Modular Design: Six-station configuration allows parallel testing of multiple specimens.
Product Features
- Electrohydraulic Actuation: Six independent servo-hydraulic actuators for precise motion control.
- 3D Force/Torque Sensors: Multi-axis sensors measure axial forces and torsional moments simultaneously.
- Temperature-Controlled Bath: Recirculating lubrication system with protein concentration monitoring.
- High-Resolution Imaging: Optional integration with micro-CT systems for in-situ wear analysis.
- AI-Powered Analytics: Machine learning algorithms predict wear rates from initial test cycles.
- Safety System: Emergency stop, over-pressure relief, and laser-based specimen breakage detection.
Technical Parameters
| Parameter | Specification |
|---|---|
| Angular Motion Range | Flexion/Extension: ±100° Abduction/Adduction: ±30° Rotation: ±40° |
| Max. Axial Force | ±4,500 N (1,000 N resolution) |
| Load Control Accuracy | ±0.5% of reading (0–4,500 N) |
| Frequency Range | 0.1–5 Hz (programmable waveforms) |
| Temperature Control | 37±2°C (PT1000 sensors) |
| Lubrication System | 15L capacity with protein skimmer and bubble trap |
| Data Acquisition | 100 kHz sampling rate (16-bit resolution) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 2,500W |
| Dimensions (W×D×H) | 1,800 × 1,200 × 2,000 mm |
| Weight | 950 kg (including bath and control cabinet) |
| Noise Level | <65 dB (A-weighted) |
Standard Accessories
- Hip Simulator Fixture Kit:
- Self-centering femoral head adapters (16–32 mm)
- Acetabular cup positioning jigs (60° inclination standard)
- Biorelevant Bath System:
- 15L capacity with recirculation pump and protein skimmer
- 316L stainless steel construction with HEPA filtration
- WearMaster Pro Software:
- Automated wear rate calculation (mass loss/volume displacement)
- 21 CFR Part 11-compliant audit trail with blockchain timestamping
- Remote monitoring via iOS/Android app
- Operator Kit:
- Calibrated torque wrench set (1–50 Nm)
- Specimen alignment gauges (ISO 14242-1 compliant)
- Calibration Bundle:
- NIST-traceable force calibration weights
- Angular encoder verification tool
- Safety Kit:
- Laser safety curtains
- Acoustic enclosure with 30 dB noise reduction
Send product request
Other supplier products
 |
Falling ball impact testing machine | Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other materials and coatings. Perf... |
 |
KK03 Scratch tester | Product Introduction: With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of mo... |
 |
Electric notch machine | Plastic electric notch prototype is a cantilever beam, simply supported beam impact testing machine to do the impact toughness test of non-metallic... |
 |
Rubber Din Abrasion Tester | Standards: DIN 53516, JIS K6369 ，GB/T 20991，GB 20265-2006，GB20266-2006，SATRA TM174，BS 903，JIS K6264，GB/T9867，ISO4649 Applications: Din rub... |
 |
Pump and Valve Contamination Tolerance Tester | Meet the standard: ISO 4406 ISO 18413 ISO 10707 ISO 6403 ISO 10372 NFPA T2.6.1 Product Introduction: Solid particle contamination is a major... |
Same products
 |
KL‑016A Benchtop High‑precision pH Meter | Seller: Kelilong Electron Co.Ltd | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | Seller: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Seller: Kelilong Electron Co.,Ltd | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Seller: Kelilong Electron Co.,Ltd | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Range EC ～19.9mS TDS Temp 0～50℃ R... |
