Comprehensive oil filter tester

Standards:

1、Executive standard: jb/t 5088.2-2008 internal combustion engine spin-on oil filter;

2、Test object: internal combustion engine oil filter, oil filter element bypass valve

3、Test item:

3.1 Measure the pressure drop-flow characteristics through the filter according to the flow rate specified by the manufacturer.

3.2 Measurement of the characteristics of the cartridge bypass valve element through the filter according to the flow rate specified by the manufacturer.

3.3 Raw filtration efficiency of oil filters.

3.4 Oil filter clogging life.

4, technical indicators:

4.1 Main test system:

4.1.1 Test system flow range: 5 L/min ~ 100L/min;.

4.1.2 Working medium: CC30 diesel oil (at 74 ℃ when the kinematic viscosity of 24 mm2 / s) No. 0 diesel fuel;

4.1.3 Pressure gauge range: 0 ~ 2MPa Measuring accuracy of ± 5%;

4.1.4 Medium temperature: room temperature ~ 100 ℃; 4.1.5 Differential pressure measurement: 0 ~ 2MPa.

4.1.5 Differential pressure measurement range: 0～600kPa; 4.1.6 Test tank: 0～600kPa; 4.1.6 Test tank: 0～2MPa

4.1.6 Test tank volume: 80L (specific data negotiated between the two sides).

4.2 Original filtration efficiency test system:

4.2.1 Test system flow range: 1L/min～10L/min; 4.2.1 Test system flow range: 1L/min～10L/min.

4.2.2 Working medium: 0# diesel fuel.

4.2.3 Medium temperature: ambient temperature.

4.2.4 Volume of test fluid cylinder: 10L.

5. Components of the test bench:

It consists of test system, bypass valve detection system, particle original filtration efficiency, life system, automatic program control system and bench.

Purification filter, the use of my company's own design and production of the flow resistance test bench special purification filter, can make the system cleanliness quickly reach the standard, dirt capacity, life β10 (c) ≥ 200. to ensure that the test results to maintain a certain degree of stability, repeatability, accuracy, and can make the test bench in a long time in a clean state. Mainly composed of oil storage tank and auxiliary pump. Convenient for personnel operation, to ensure the convenience of post-processing of the test bench before and after the test. 　

Piping: the main test system piping using stainless steel, pipe joints and piping layout to avoid the flow of dead zone, thus avoiding impurities in the long-term use of sludge, to ensure the test bench repeat

Temperature control system: with heating and radiator devices, and should meet the safety requirements. 　　

Bypass Valve Test System: Borrow the test system of flow resistance. A separate bypass valve test line is added to the working panel. Mainly consists of bypass valve test line, filter assembly without cartridge (according to the customer's specific force transducer, pressure digital display meter. 　　

Particle original filtration efficiency, life system: mainly composed of peristaltic pump, bypass valve, differential pressure sensor, filter container, impurity agitator. 　

Bench :Made of aluminum alloy profile, stainless steel plate. Dimensions (reference 3000×1200×1900) and shape need to be countersigned by both parties.

Other supplier products

	BBA steady state solar simulator tester	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photo...
	Mask Respiratory Resistance Tester	Standards: GB 19083, GB 2626, GB/T 32610, 42 CFR Part 84 JIS/T 8151 EN 149, EN 12941, EN 14594, NFPA 1972 Applications: The respiratory resistance...
	Wascator FOM 71 CLS Lab Washer - Extractor	Standards: ISO 5077/6330, M&S P1/P1A/P3A/P12/P91/P99/P99A/P13, BS EN25077/26330, NEXT TM7/7A/7B/TM12, GB/T 8629, IWSTM 31, IEC 456 Appl...
	Nissan 4-Station Abrasion Tester for Multi-Material Durability Tester	Standard ASTM D3884(Standard Guide for Abrasion Resistance of Textile Fabrics) ISO 5470-1(Rubber- or Plastics-Coated Fabrics - Abrasion Resistanc...
	Motorcycle Helmet Sand Drop Tester/ Helmet Falling Sand Tester/ Motorcycle Falling Sand Abrasion Tester	Introduction: Motorcycles endure a relentless barrage of environmental elements, and few components face as much abuse as their exterior surfaces....

All supplier products

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...